481 results
Search Results
Now showing 1 - 10 of 481
- Itemstress generation modulus as a counterpart of the stress relaxation modulus(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1995) Brückner, Rolf; Hessenkemper, Heiko; Habeck, Andreas; Yue, YuanzhengIn order to measure the time dependence of the stress relaxation modulus, E, a stress-strain deformation has to precede which induces a stress within the viscoelastic sample from which the sample relaxes. The generation of stress is characterized by a strain rate-dependent and relaxation rate-dependent portion which exhibits a maximum value, E_max, which is called "stress generation modulus". E_max was called the "maximum stress relaxation modulus" in earlier papers. Meanwhile, however, it turned out that a better verbal distinction should be made in future by the new term "stress generation modulus" because E_max is about one order of magnitude larger than E.
- ItemZerstörungskennlinien für Verbundsicherheitsglasscheiben(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2001) Mayrhofer, Christoph; Kranzer, CarolineFür die Bewertung des Tragverhaltens von Bauteilen bei Explosionsereignissen sind sogenannte „Druck-Impuls-Diagramme" erforderlich. Diese geben in Abhängigkeit vom Druck und dem Impuls der Belastung an, für welche Wertepaare Zerstörung eintritt und welchen Belastungswerten das betrachtete Bauteil standhält. Derartige Zerstörungskennlinien sind am Fraunhofer EMI für eine Vielzahl von Werkstoffen entwickelt worden. Den Zerstörungskennlinien liegt das Rechenmodell des Ein-Massen-Schwingers zugrunde. Voraussetzungen für seine Anwendbarkeit sind Biegetragmechanismen, Bruch- bzw. Zerstörungskriterien (z.B. Grenzdurchbiegung) und die Kenntnis des statischen Last-Verformungsverhaltens. Untersuchungen ergaben, daß Verbundsicherheitsglasscheiben die Voraussetzungen für die Erstellung von Zerstörungskennlinien erfüllen. Es wird eine Näherungsmethode zur Erfassung des statischen Tragverformungsverhaltens unter Berücksichtigung von Membranspannungszuständen dargestellt. Am Beispiel anderer Werkstoffe wird die prinzipielle Vorgehensweise erläutert, da für Verbundsicherheitsscheiben bisher noch keine Bruchkriterien zur Verfügung stehen.
- ItemCollaborative study into the analysis of total selenium and selenium valence states in glass - a general method by hydride generation atomic absorption spectrometry and photometry : Report of the International Commission on Glass (ICG) Technical Committee 2 "Chemical Durability and Analysis"(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2000) Guadagnino, Emanuel; Çorumluoğlu, OrhanWhilst the determination of total selenium in glass is of great relevance to environmental purposes, the measurement of the oxidation states of selenium which may arise under different redox conditions may contribute to clarify the mechanisms of colour formation. In the proposed method, the determination of total selenium is carried out by hydride generation atomic absorption spectrometry (HGAAS) on three different glasses covering the range of selenium content between 10 and 130 mg/kg of glass. To prevent losses during the decomposition step, selenium is converted into a nonvolatile form as selenate (Se6+). When the sample is decomposed, the HCl Solution (c(HC1) = 10 mol/l) is made and selenium is pre-reduced to Se4+ by heating for 2 h at 80 °C. The determination of selenium oxidation states requires a stepwise approach. The measurement of Se0 is based on its insolubility in HF. After the sample is decomposed, Se0 is filtered off, dissolved from the filter with a HBr-Br2 mixture and finally measured by HGAAS. Se4+ and Se6+ are recovered in the filtrate of the same sample and determined together after conversion of Se4+ into Se6+. Se4+ is determined in the same filtrate by photometry with o-phenylenediamine (OPDA).
- ItemAdvanced oxygen burner for the glass industry(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1997) Legiret, Thierry; Philippe, Louis; Tsiava, Remi; Marié, Bruno[no abstract available]
- ItemThermodynamic calculations of chemical solubilities of gases in oxide melts and glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1999) Pelton, Arthur D.The Reddy-Blander thermodynamic model for calculating sulfide solubilities in oxide melts and glasses has been modified and extended to predict a priori solubilities of sulfide, sulfate, phosphate, carbonate and halides in multicomponent oxide melts and glasses, from a knowledge of the thermodynamic activities of the basic component oxides (SiO₂, Na₂O, K₂O, CaO, etc.), in most cases with no adjustable parameters. Agreement with measured solubilities is within or nearly within experimental uncertainties over wide ranges of composition in two-, three-, four- and five-component melts and glasses. Particularly good agreement is obtained for the dissolution of sulfur, SO₂ and SO₃ as sulfate. The oxide activities used in the computations are calculated from a database of model parameters obtained by optimizing thermodynamic and phase equilibrium data for oxide Systems. Sulfide, sulfate, phosphate, carbonate and halides as solutes have now been included in this database. Software for Gibbs energy minimization with automatic access to this and other databases permits the calculation of solubilides in multicomponent oxide melts and glasses in equilibrium with other phases such as gases, molten salts, solids and metals, and can be useful to model evaporation processes and bubble formation.
- ItemInfluence of modifier cations on the radiation-induced effects of metaphosphate glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2003) Ebeling, Polina; Ehrt, Doris; Friedrich, ManfredThe influence of different modifying cations on the radiation-induced defect generation in metaphosphate glasses was studied by optical absorption and electron paramagnetic resonance spectroscopy. For this task, several model glasses were prepared. These were simple metaphosphates of alkaline earths, aluminum and zinc. The synthesized glass samples were irradiated with X-rays and with UV light from an Xe/Hg lamp. The cation-dependent differences in the structure of the phosphate glasses were found to have a great influence on the concentration of some radiation-induced defects and thus on the optical absorption. The influence of the different cations became especially distinct under UV light Irradiation due to the selective interaction of the UV light with the glass samples. Some additional phenomena were observed for the irradiated zinc and magnesium metaphosphate glasses which were not found by the previously undertaken study of complex phosphate glasses.
- ItemKonventionell beheizte Glasschmelzöfen für die Hohl- und Flachglasherstellung im deutschsprachigen Raum - Ergebnisse einer HVG-Umfrage - Teil 1. Beheizung, bauliche Merkmale, Schmelzleistung(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1997) Fleischmann, Bernhard[no abstract available]
- ItemIn-situ investigations of sintering and crystallization of lithium aluminosilicate glass-ceramics(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1997) Zimemr, José; Raether, Friedrich; Müller, GerdThe sintering and crystalhzation behaviour of a Li₂O-Al₂O₃-SiO₂ glass powder containing TiO₂ and ZrO₂ was investigated by the in-situ measuring methods of high-temperature dilatometry, high-temperature X-ray diffractometry and differential thermal analysis at heating rates between 0.5 a n d 20 K/min. By comparing the results of the different methods the shrinkage could be explained as an overlap of sintering and crystallization processes. When increasing the heating rate, the sintering and crystallization processes are separated mor e sharply, so that higher final densities of the sintered samples can be achieved.
- ItemUV-VIS spectroscopic investigations of amber glass at high temperatures(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1999) Müller, Matthias; Rüssel, Christian; Claußen, OlafThe absorption spectra of iron-containing glasses and an amber glass were recorded in the temperature ränge of 25 to 700 °C. Α shift of the UV absorption edge towards lower wave numbers with increasing temperature was found. The amount of the shift depends on the Fe³⁺ concentration. Here, the UV absorption edge may superimpose or even cover up the absorption bands of colouring ions with increasing temperatures. For an amber glass sample, with increasing temperature, the intensity of the absorption bands of the amber chromophore decreases slightly. However, above 550 °C the decomposition of the chromophore is observed. All changes are reversible when temperature is decreased again. The decomposition of the chromophore and the attributed temperature ränge are in agreement with thermodynamic calculations.
- ItemDetermination of the composition of glass, glass-ceramics and glass raw materials with Laser-ICP-MS(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1999) Strubel, Christine; Meckel, Lothar; Effenberger, RuthΑ mass-spectrometric method with an inductively coupled plasma as an ion source (ICP-MS) is presented which uses an excimer laser for direct ablation of solid material. The oxide compositions of a television screen glass, a glass-ceramic and a quartz powder analyzed by LA-ICP-MS are given and compared with data obtained by wet chemical analysis. Fundamental processes of the technique are described and advantages and disadvantages for the analysis of glass are discussed.