Filters

2000 - 200990

More filters

2018 - 2019342020 - 202356
Reset filters

Settings

End date: 2009 × Start date: 2000 × DDC: 540 × Has files: Yes × Type: Text ×

Search Results

Now showing 1 - 10 of 90
  • Thumbnail Image
    Item
    Crystal structure of (2S,4S,7S)-7,7-dichloro-4-(1-chloro-1-methylethyl)-1- (2,2,2-trichloroethyl)bicyclo[4.1.0]heptane, C12H16Cl 6
    (Berlin : de Gruyter, 2009) Boualy, B.; el Firdoussi, L.; Ali, M.A.; Karim, A.; Spannenberg, A.
    C12H16Cl6, orthorhombic, P2 12121 (no. 19), a = 6.0742(3) Å, b = 9.7189(6) Å, c = 26.700(1) Å, V = 1576.2 Å3, Z = 4, Rgt(F) = 0.019, wRref(F2) = 0.045, T= 200 K. © by Oldenbourg Wissenschaftsverlag.
  • Thumbnail Image
    Item
    Mechanisms of bonding effected by nanoparticles in zirconia coatings applied by spraying of suspensions
    (Saarbrücke : Leibniz-Institut für Neue Materialien, 2008) Adam, Jens; Aslan, Mesut; Drumm, Robert; Veith, Michael
    Zirconia coatings consisting of a mixture of coarse and fine grained zirconia powders prepared by spraying of suspensions and subsequent thermal treatment at limited temperatures (up to 500°C) are poor in adherence and in intrinsic mechanical strength. We have shown elsewhere that mechanical properties of these coatings can be improved clearly by adding a small amount of nanoscaled zirconia. Here, the structural and the chemical development of this coating material and of the nanoparticles is examined to gain information about the underlying bonding mechanisms. The applied temperature is relatively low in comparison to the usual onset temperature of accelerated sintering. Nevertheless, the results show that diffusion controlled material transport mechanisms play their role in bonding. The condensation of surface OH groups may participate in bonding, too. These first results confirm the potential of nanoparticles to act as inorganic binder. Additional research effort to clarify the underlying mechanisms in detail is of interest. For the practical side, it can be concluded that the resulting effect of mechanical consolidation of ceramic structures at relatively low temperatures enables new ceramic applications, for example a new type of ceramic coatings on metallic substrates.
  • Thumbnail Image
    Item
    Comparison of the molecular properties and morphology of polypropylenes irradiated under different atmospheres and after annealing
    (Hoboken, NJ [u.a.] : Wiley InterScience, 2006) Krause, Beate; Häußler, Liane; Voigt, Dieter
    Electron-beam irradiation, a well-known way of generating long-chain branching, was used to modify polypropylene. Samples were investigated with differential scanning calorimetry, polarized light microscopy, and size exclusion chromatography. Independently of the atmosphere, postannealing led to the deactivation of residual radicals and to the reduction of the nucleus density. In comparison with the initial polypropylene, the crystallization temperatures increased for nonannealed samples but decreased for annealed samples. Stable products were obtained only by irradiation in nitrogen followed by annealing. A reaction including free radicals with oxygen in the ambient atmosphere led to increasing molar mass degradation and the formation of long-chain branching after Storage. © 2006 Wiley Periodicals, Inc.
  • Thumbnail Image
    Item
    Transparent conductive oxides for coating applications
    (Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Quilitz, Mario; Oliveira, Peter W. de; Heusing, Sabine; Veith, Michael
    Transparent, conductive oxides (TCOs) applied as coatings find multiple applications in various areas such as flat panel display setups, as electrodes in touch-screen panels, electrochromic devices, solar cells and in architectural applications for example as IR reflectors. The favored material in the class of TCOs is still ITO - Sn-doped In2O3 - due to its unique combination of high transparency and electrical conductivity. Though already very good, the potential of the ITO coatings with regard to their conductivity leaves some space for future improvements. Also ITO as a material has some serious drawbacks, such as limited availability and high costs. this work presents some stratgies to overcome these obstacles. One way to enhance the conductivities of alternative materials is to use carbon nanotubes as a dopant. This strategy was tested for ATO (Antimony-doped Tin Oxide), Titan dioxide and AZO (Aluminium-doped Zinc oxide). The results for these materials are presented. In coatings of ITO on glass or polymeric foils usually silica-based binders are used. They have the disadvantage to reduce the contact between the highly conducting grains and thus reduce overall conductivity in the composite. The matrix between the nanoparticles can be improved by several measures. Experiments with relevance in this direction are discussed. A third strategy aims at the reduction of costs in the process of ITO fabrication. Here one way to go is to use an electrochemical synthesis method. Results of the line of development are presented. Other strategies comprise the suitable processing of materials with a lower intrinsic conductivity or the search for materials with high intrinsic conductivity close to that of ITO. Exmples are presented and discussed.
  • Thumbnail Image
    Item
  • Thumbnail Image
    Item
    New electronic device for driving surface acoustic wave actuators
    (Amsterdam : Elsevier, 2009) Brünig, R.; Mensel, K.; Kunze, R.; Schmidt, H.
    Surface acoustic wave (SAW) actuators are driven by a high frequency signal. The frequency range for an ideal SAW-generation is usually very narrow banded and may shift depending on various environmental conditions. We present a new electronic device which self-aligns to the optimal excitation frequency within a wide range. Any kind of SAW-actuator can be used. The device continuously scans a certain frequency range and characterizes the SAW-component. The ideal excitation frequency is then determined and used to drive the SAW-device. In case of changes like loading conditions or temperature variations the device automatically readjusts to the optimal frequency and prevents possible damage of the device or actuator in case of an error. © 2009.
  • Thumbnail Image
    Item
    Diacetonitrile[N,N′-bis(2,6-diisopropyl-phenyl)ethane-1,2-diimine] dichloridochromium(II) acetonitrile solvate
    (Chester : International Union of Crystallography, 2009) Peitz, S.; Peulecke, N.; Müller, B.H.; Spannenberg, A.; Rosenthal, U.
    The title compound, [CrCl2(CH3CN)2(C 26H36N2)]·CH3CN, was synthesized by the reaction of CrCl2(THF)2 with N,N′-bis-(2,6- diisopropyl-phen-yl)ethane-1,2-diimine in dichloro-methane/acetonitrile. The chromium center is coordinated by two N atoms of the chelating diimine ligand, two chloride ions in a trans configuration with respect to each other, and by two N atoms of two acetonitrile mol-ecules in a distorted octa-hedral geometry.
  • Thumbnail Image
    Item
  • Thumbnail Image
    Item
    Nuevo sistema integrado cromatografía líquida de alta resolución / nebulizador hidráulico de alta presión y temperatura (HPLC/HT-HHPN) para la separación automática de la matriz en la determinación de metales en salmueras con espectrometría de absorción atómica (FAAS)
    (Sao Paulo : Scielo, 2000) Yáñez, J.; Berndt, H.
    An integrated HPF-system using HPLC and HT-HHP-nebulizer is used for matrix separation by the determination of heavy metals in highly concentrated solutions with FAAS. The separation of the matrix (NaCl) is achieved in a HPLC RP-C18 column after heavy metal complexing with trans-1,2-diaminciclohexane-N,N,N ,N -tetraacetic acid (CDTA). Matrix separation and the metal determination can be realized in less than one minute, without any interference from the matrix. The detection limits of Cd(II), Co(II), Cr(VI), Cu(II), Mn(II) and Zn(II) by FAAS were improved in one order of magnitude in compare with the direct determination by pneumatic nebulization nebulizer.
  • Thumbnail Image
    Item
    Oberflächenmorphologie von Arzneistoffpartikeln - Ein optisch evaluierbares Kriterium für die Auflösungsgeschwindigkeit
    (München : Elsevier, Urban & Fischer , 2002) Diebold, Steffen M.
    Für die Auflösungsgeschwindigkeit von schwer wasserlöslichen Arzneistoffpartikeln spielt die Hydrodynamik an den Partikel-Oberflächen eine große Rolle. Diese ist ihrerseits beeinflußt von der Geometrie und der Oberflächenmorphologie der Partikel. In dieser Arbeit wurde gezeigt, dass sich zur Charakterisierung dieser Parameter die Rasterelektronenmikroskopie (SEM) auch für die Untersuchung von Arzneistoffen gut eignet. Am Beispiel von Felodipin-Kristallen wurde nachgewiesen, dass reale Arzneistoffpulver auch an scheinbar „glatten“ Oberflächen Protrusionen, Kanten und Kavitäten aufweisen. Deren Größenordnungen lassen sich mit Hilfe der Elektronenmikroskopie abschätzen. Die Oberflächenmorphologie von Arzneistoffpartikeln ist ein Kriterium für die Auflösungsgeschwindigkeit oral verabreichter Arzneistoffe. Die Rasterelektronenmikroskopie leistet dabei wertvolle Dienste zur Charakterisierung der Oberflächen von Arzneistoffpartikeln.