9 results
Search Results
Now showing 1 - 9 of 9
- ItemFibre optic sensing system for monitoring of current collectors and overhead contact lines of railways(Göttingen : Copernicus Publ., 2017) Schröder, Kerstin; Rothhardt, Manfred; Ecke, Wolfgang; Richter, Uwe; Sonntag, André; Bartelt, HartmutFibre optic sensors are excellent tools to use for monitoring high-voltage current collectors. Because of their small cross section and electrical neutrality, they are easily integrated into the current collector strip and are well specialized for detection of high-speed load events. The conventional contact force measurement with four force sensors below the collector strips can also be simplified by using fibre optic force and acceleration sensors.
- ItemGranular metal-carbon nanocomposites as piezoresistive sensor films - Part 1: Experimental results and morphology(Göttingen : Copernicus Publ., 2018) Schultes, Günter; Schmid-Engel, Hanna; Schwebke, Silvan; Werner, UlfWe have produced granular films based on carbon and different transition metals by means of plasma deposition processes. Some of the films possess an increased strain sensitivity compared to metallic films. They respond to strain almost linearly with gauge factors of up to 30 if strained longitudinally, while in the transverse direction about half of the effect is still measured. In addition, the film's thermal coefficient of resistance is adjustable by the metal concentration. The influence of metal concentration was investigated for the elements Ni, Pd, Fe, Pt, W, and Cr, while the elements Co, Au, Ag, Al, Ti, and Cu were studied briefly. Only Ni and Pd have a pronounced strain sensitivity at 55- €±- €5- €at.- €% (atomic percent) of metal, among which Ni–C is far more stable. Two phases are identified by transmission electron microscopy and X-ray diffraction: metal-containing nanocolumns densely packed in a surrounding carbon phase. We differentiate three groups of metals, due to their respective affinity to carbon. It turns out that only nickel has the capability to bond and form a stable and closed encapsulation of GLC around each nanoparticle. In this structure, the electron transport is in part accomplished by tunneling processes across the basal planes of the graphitic encapsulation. Hence, we hold these tunneling processes responsible for the increased gauge factors of Ni–C composites. The other elements are unable to form graphitic encapsulations and thus do not exhibit elevated gauge factors.
- ItemUltrafast imaging Raman spectroscopy of large-area samples without stepwise scanning(Göttingen : Copernicus Publ., 2016) Schmälzlin, Elmar; Moralejo, Benito; Bodenmüller, Daniel; Darvin, Maxim E.; Thiede, Gisela; Roth, Martin M.Step-by-step, time-consuming scanning of the sample is still the state-of-the-art in imaging Raman spectroscopy. Even for a few 100 image points the measurement time may add up to minutes or hours. A radical decrease in measurement time can be achieved by applying multiplex spectrographs coupled to imaging fiber bundles that are successfully used in astronomy. For optimal use of the scarce and expensive observation time at astronomical observatories, special high-performance spectrograph systems were developed. They are designed for recording thousands of spatially resolved spectra of a two-dimensional image field within one single exposure. Transferring this technology to imaging Raman spectroscopy allows a considerably faster acquisition of chemical maps. Currently, an imaging field of up to 1 cm2 can be investigated. For porcine skin the required measurement time is less than 1 min. For this reason, this technique is of particular interest for medical diagnostics, e.g., the identification of potentially cancerous abnormalities of skin tissue.
- ItemGranular metal-carbon nanocomposites as piezoresistive sensor films-Part 2: Modeling longitudinal and transverse strain sensitivity(Göttingen : Copernicus Publ., 2018) Schwebke, Silvan; Werner, Ulf; Schultes, GünterGranular and columnar nickel-carbon composites may exhibit large strain sensitivity, which makes them an interesting sensor material. Based on experimental results and morphological characterization of the material, we develop a model of the electron transport in the film and use it to explain its piezoresistive effect. First we describe a model for the electron transport from particle to particle. The model is then applied in Monte Carlo simulations of the resistance and strain properties of the disordered films that give a first explanation of film properties. The simulations give insights into the origin of the transverse sensitivity and show the influence of various parameters such as particle separation and geometric disorder. An important influence towards larger strain sensitivity is local strain enhancement due to different elastic moduli of metal particles and carbon matrix.
- ItemParadigm change in hydrogel sensor manufacturing: From recipe-driven to specification-driven process optimization(Göttingen : Copernicus Publ., 2016) Windisch, M.; Eichhorn, K.-J.; Lienig, J.; Gerlach, G.; Schulze, L.The volume production of industrial hydrogel sensors lacks a quality-assuring manufacturing technique for thin polymer films with reproducible properties. Overcoming this problem requires a paradigm change from the current recipe-driven manufacturing process to a specification-driven one. This requires techniques to measure quality-determining hydrogel film properties as well as tools and methods for the control and optimization of the manufacturing process. In this paper we present an approach that comprehensively addresses these issues. The influence of process parameters on the hydrogel film properties and the resulting sensor characteristics have been assessed by means of batch manufacturing tests and the application of several measurement techniques. Based on these investigations, we present novel methods and a tool for the optimization of the cross-linking process step, with the latter being crucial for the sensor sensitivity. Our approach is applicable to various sensor designs with different hydrogels. It has been successfully tested with a sensor solution for surface technology based on PVA/PAA hydrogel as sensing layer and a piezoelectric thickness shear resonator as transducer. Finally, unresolved issues regarding the measurement of hydrogel film parameters are outlined for future research.
- ItemIdentifying Multiple Influential Users Based on the Overlapping Influence in Multiplex Networks(New York, NY : IEEE, 2019) Chen, Jianjun; Denk, Yue; Su, Zhen; Wang, Songxin; Gao, Chao; Li, XianghuaOnline social networks (OSNs) are interaction platforms that can promote knowledge spreading, rumor propagation, and virus diffusion. Identifying influential users in OSNs is of great significance for accelerating the information propagation especially when information is able to travel across multiple channels. However, most previous studies are limited to a single network or select multiple influential users based on the centrality ranking result of each user, not addressing the overlapping influence (OI) among users. In practice, the collective influence of multiple users is not equal to the total sum of these users' influences. In this paper, we propose a novel OI-based method for identifying multiple influential users in multiplex social networks. We first define the effective spreading shortest path (ESSP) by utilizing the concept of spreading rate in order to denote the relative location of users. Then, the collective influence is quantified by taking the topological factor and the location distribution of users into account. The identified users based on our proposed method are central and relatively scattered with a low overlapping influence. With the Susceptible-Infected-Recovered (SIR) model, we estimate our proposed method with other benchmark algorithms. Experimental results in both synthetic and real-world networks verify that our proposed method has a better performance in terms of the spreading efficiency. © 2013 IEEE.
- ItemRandom Noise Suppression of Magnetic Resonance Sounding Oscillating Signal by Combining Empirical Mode Decomposition and Time-Frequency Peak Filtering(New York, NY : IEEE, 2019) Lin, Tingting; Zhang, Yang; Muller-Petke, MikeMagnetic resonance sounding (MRS) signals are always corrupted by random noise. Although time-frequency peak filtering (TFPF) has been proven to be an effective method to suppress the random noise, it shows shortcomings when processing the oscillating high-frequency MRS signal at about 2 kHz. In this study, a new method combining empirical mode decomposition (EMD) and TFPF is proposed to overcome the TFPF limitation when processing the MRS oscillating signal. With the help of EMD decomposition characteristics, the random-noise-corrupted MRS oscillating signal is first decomposed into several different components which contain frequencies ranging from the highest to the lowest ones. Then, the components which do not have signal frequency are discarded to bring down the level of random noise. The residual components are further processed by TFPF, respectively, based on the theory of instantaneous frequency estimation and the property of noise accumulation. Finally, the de-noised result is obtained by reconstructing the processed components. The numerical simulations on synthetic signals embedded in both artificial noise and real noise show the combined method can improve the signal-to-noise ratios and reduce the uncertainties of signal parameters. In addition, the combined method is applied following a standard processing scheme in field data, and better results are also obtained.
- ItemFormation mechanism of streamer discharges in liquids: A review(Stevenage : IET, 2016) Sun, Anbang; Huo, Chao; Zhuang, JieStreamer discharges in liquids have received lots of attention with respect to their considerable applications in various disciplines. Much effort has been spent to understand the basis of streamer ignition and propagation in dielectric liquids, but a comprehensive mechanism is far from conclusive. In this review, based on an introduction to the streamer physics and experimentally observed characteristics in various liquids, the authors emphasise on the current status of streamer discharge ignition mechanisms and present their understanding for each theory.
- ItemRolled‐Up Self‐Assembly of Compact Magnetic Inductors, Transformers, and Resonators(Weinheim : Wiley-VCH Verlag GmbH & Co. KG, 2018-8-17) Karnaushenko, Dmitriy D.; Karnaushenko, Daniil; Grafe, Hans‐Joachim; Kataev, Vladislav; Büchner, Bernd; Schmidt, Oliver G.3D self-assembly of lithographically patterned ultrathin films opens a path to manufacture microelectronic architectures with functionalities and integration schemes not accessible by conventional 2D technologies. Among other microelectronic components, inductances, transformers, antennas, and resonators often rely on 3D configurations and interactions with electromagnetic fields requiring exponential fabrication efforts when downscaled to the micrometer range. Here, the controlled self-assembly of functional structures is demonstrated. By rolling up ultrathin films into cylindrically shaped microelectronic devices, electromagnetic resonators, inductive and mutually coupled coils are realized. Electrical performance of these devices is improved purely by transformation of a planar into a cylindrical geometry. This is accompanied by an overall downscaling of the device footprint area by more than 50 times. Application of compact self-assembled microstructures has significant impact on electronics, reducing size, fabrication efforts, and offering a wealth of new features in devices by 3D shaping.