30 results
Search Results
Now showing 1 - 10 of 30
- ItemApplication of the transferred matrix method to a unified evaluation of the cathodic electron emission(New York, NY : American Inst. of Physics, 2018) Baeva, M.The work is concerned with the Transfer Matrix Method for solving the steady-state Schrödinger equation applied for a unified evaluation of the emission current density from non-refractory cathodes. The method is applicable to arbitrary shapes of the potential barrier and its transmission probability is obtained without any analytical approximations. The Fermi-Dirac distribution for the free electrons in the metal is considered as a supply function. The results, obtained for a work function of the cathode material of 4.5 eV over a wide range of values of the surface temperature and the electric field strength, clearly show a growing deviation from those obtained by the classical Jeffreys-Wentzel-Kramers-Brillouin approximation with the increase of the electric field strength. Preliminary results are obtained to demonstrate the applicability of the Transfer Matrix method to the evaluation of the ion-assisted electron emission. A significant local enhancement of the emission current density is obtained as a result of the presence of an ion at a fixed position near the metal surface. The effect becomes very strongly pronounced at an appropriate value of the electric field strength, for which a resonant ion contribution appears.
- ItemThe equivalent circuit approach for the electrical diagnostics of dielectric barrier discharges: The classical theory and recent developments(Basel : MDPI AG, 2019) Pipa, Andrei V.; Brandenburg, RonnyMeasurements of current and voltage are the basic diagnostics for electrical discharges. However, in the case of dielectric barrier discharges (DBDs), the measured current and voltage waveforms are influenced by the discharge reactor geometry, and thus, interpretation of measured quantities is required to determine the discharge properties. This contribution presents the main stages of the development of electrical diagnostics of DBDs, which are based on lumped electrical elements. The compilation and revision of the contributions to the equivalent circuit approach are targeted to indicate: (1) the interconnection between the stage of development, (2) its applicability, and (3) the current state-of-the-art of this approach. © 2019 by the authors.
- ItemCorrigendum: Dielectric barrier discharges: progress on plasma sources and on the understanding of regimes and single filaments (Plasma Sources Science and Technology (2017) 26 (053001) DOI: 10.1088/1361-6595/aa6426)(Bristol : IOP Publ., 2018) Brandenburg, RonnyThe paper Dielectric barrier discharges: progress on plasma sources and on the understanding of regimes and single filaments? [1] contains a serious misprint in the section ?Electrical behavior and characterization?. The correct equation (5) for the determination of the gap voltage Ug is as follows (Formula Presented). The second term is the voltage across the barrier (Ub) which is determined by the charge Q t and the capacity of the barrier(s) Cd. The parameter 1 Ccell as written in the original paper is not correct, and a misprint. The sum of gap voltage and barrier voltage equals the applied voltage V t . Detailed explanations about the formula can be found in the cited literature, in particular [2-4].
- ItemAdvanced fluid modeling and PIC/MCC simulations of low-pressure ccrf discharges(Bristol : IOP Publ., 2017-3-2) Becker, M.M.; Kählert, H.; Sun, A.; Bonitz, M.; Loffhagen, D.Comparative studies of capacitively coupled radio-frequency discharges in helium and argon at pressures between 10 and 80 Pa are presented applying two different fluid modeling approaches as well as two independently developed particle-in-cell/Monte Carlo collision (PIC/MCC) codes. The focus is on the analysis of the range of applicability of a recently proposed fluid model including an improved drift-diffusion approximation for the electron component as well as its comparison with fluid modeling results using the classical drift-diffusion approximation and benchmark results obtained by PIC/MCC simulations. Main features of this time- and space-dependent fluid model are given. It is found that the novel approach shows generally quite good agreement with the macroscopic properties derived by the kinetic simulations and is largely able to characterize qualitatively and quantitatively the discharge behavior even at conditions when the classical fluid modeling approach fails. Furthermore, the excellent agreement between the two PIC/MCC simulation codes using the velocity Verlet method for the integration of the equations of motion verifies their accuracy and applicability.
- ItemEmission Spectroscopy During High-Current Anode Modes in Vacuum Arc(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2017) Khakpour, A.; Methling, R.; Franke, S.; Gortschakow, S.; Uhrlandt, D.A vacuum interrupter reaches its interruption limit once high-current anode phenomena occur. High-current anode modes lead to an increase of the anode surface temperature and an increased generation of metal vapor, which may result in a weakening of the dielectric recovery strength after current zero. In this work, different discharge modes in a vacuum arc for AC 50 Hz including diffuse, footpoint, anode spot type 1 and type 2, and anode plume are investigated. Electrodes made of CuCr7525 with diameter of 10 mm are used. The final gap length is about 20 mm. Time and space resolved optical emission spectroscopy is used to examine the temporal and spatial distribution of atomic and ionic copper lines. The distribution of atomic and ionic lines parallel and perpendicular to the anode surface is investigated. Radiator density is also determined for CuI, CuII, and CuIII near the anode surface.
- ItemComparative studies of low-intensity short-length arcs(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2019) Baeva, M.; Siewert, E.; Uhrlandt, D.We present results obtained by two non-equilibrium modelling approaches and experiments on low-intensity short-length arcs in argon at atmospheric pressure. The first one considers a quasi-neutral arc column combined with boundary conditions on the electrodes based on the energy balance in the space-charge sheaths. The second approach applies a unified description over the entire gap and solves the Poisson equation for the self-consistent electric field. The experiments provide the arc voltage.
- ItemFrom patent to product? 50 years of low-pressure plasma sterilization(Weinheim : Wiley-VCH, 2018-10-18) Fiebrandt, Marcel; Lackmann, Jan-Wilm; Stapelmann, KatharinaThe development of new sterilization methods is still a major topic. The need for new techniques arises from the development of new instruments and the usage of different materials. Especially in the case of plastics with their beneficial properties, for example, in the field of implantology, plasma sterilization is seen as a promising alternative to the standard methods. However, 50 years after the first patent and although low-pressure plasmas show excellent inactivation performance (>log 6 reduction), only one commercial system is available on the market for a distinct application. We will give a short review about known plasma sterilization mechanisms, the different plasma sterilization systems in use, analyze possible challenges for an industrial process and comment on possible solutions for a broader acceptance and utilization of low-pressure plasma sterilization.
- ItemAnalysis of C2 SWAN bands in ablation-dominated arcs in CO2 atmosphere(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2019) Methling, R.; Franke, St.; Götte, N.; Wetzeler, S.; Uhrlandt, D.A model circuit breaker in a high-pressure chamber filled with CO2 atmosphere is used to operate a wall-stabilized arc of several kilo-amperes between tungsten-copper electrodes surrounded by polytetrafluoroethylene nozzles. Optical emission spectroscopy (OES) is carried out via quartz plates inserted into the nozzles using a combination of an imaging spectrometer either with a high-speed video camera or with an ICCD camera. Depending on the nozzle geometry and the current, continuum from C2 Swan bands was detected as absorption as well as emission pattern. After current zero, optical absorption spectroscopy (OAS) using a xenon flashlamp as broadband background radiator was applied. An absorption around 493 nm was detected and attributed to CuF molecules. The study proofs the existence of C2 in the active phase and the formation of CuF near to current zero.
- ItemAnalysis of erosion resistance of CuC arcing contacts manufactured by plasma spraying technology(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2019) Derevyankin, P.; Frolov, V.; Gonzalez, D.; Gortschakow, S.; Methling, R.; Uhrlandt, D.Results of the erosion resistance study of the CuC electrodes manufactured by plasma spraying technology are presented. The diagnostics has have been performed by means of high-speed camera technique and optical emission spectroscopy which has been synchronised with electrical diagnostics. After the load material analyses, namely determination of mass loss and analysis of micro sections, have been done. It has been found that the erosion rate depends on conditions applied for the formation of coating layer, which was deposited either in air or in argon plasma. Furthermore, the erosion rate is significantly lower in the case of air plasma spraying.
- Item3D analysis of low-voltage gas-filled DC switch using simplified arc model(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2019) Gortschakow, S.; Gonzalez, D.; Yu, S.; Werner, F.Electro-magnetic simulations have been used for the visualization of distribution of Lorentz force acting on a DC switching arc in low-voltage contactor. A simplified plasma model (black-box model) was applied for the description of arc conductivity. Arc geometry was gained from the high-speed camera images. Influence of arc position, arc current and of external magnetic field has been studied. Results have been compared with optical observations of the arc dynamics.