Filters

More filters

2019 - 20196452020 - 2024364
Reset filters

Settings

End date: 2019 × DDC: 620 ×

Search Results

Now showing 1 - 10 of 1009
  • Thumbnail Image
    Item
    Research Update: Van-der-Waals epitaxy of layered chalcogenide Sb2Te3 thin films grown by pulsed laser deposition
    (Melville, NY : AIP Publ., 2017) Hilmi, Isom; Lotnyk, Andriy; Gerlach, Jürgen W.; Schumacher, Philipp; Rauschenbach, Bernd
    An attempt to deposit a high quality epitaxial thin film of a two-dimensionally bonded (layered) chalcogenide material with van-der-Waals (vdW) epitaxy is of strong interest for non-volatile memory application. In this paper, the epitaxial growth of an exemplary layered chalcogenide material, i.e., stoichiometric Sb2Te3 thin films, is reported. The films were produced on unreconstructed highly lattice-mismatched Si(111) substrates by pulsed laser deposition (PLD). The films were grown by vdW epitaxy in a two-dimensional mode. X-ray diffraction measurements and transmission electron microscopy revealed that the films possess a trigonal Sb2Te3 structure. The single atomic Sb/Te termination layer on the Si surface was formed initializing the thin film growth. This work demonstrates a straightforward method to deposit vdW-epitaxial layered chalcogenides and, at the same time, opens up the feasibility to fabricate chalcogenide vdW heterostructures by PLD.
  • Thumbnail Image
    Item
  • Thumbnail Image
    Item
    Schlussbericht zum BMBF-Vorhaben: Compact optohybrids (CoOp), Teilvorhaben: Ionenätzverfahren für die Strukturierung
    (Hannover : Technische Informationsbibliothek (TIB), 2006) Schindler, Axel
    [no abstract available]
  • Thumbnail Image
    Item
    Polymeric monolithic materials: Syntheses, properties, functionalization and applications
    (Amsterdam : Elsevier, 2007) Buchmeiser, M.R.
    The synthetic particularities for the synthesis of polymer-based monolithic materials are summarized. In this context, monoliths prepared via thermal-, UV- or electron-beam triggered free radical polymerization, controlled TEMPO-mediated radical polymerization, polyaddition, polycondensation as well as living ring-opening metathesis polymerization (ROMP) will be covered. Particular attention is devoted to the aspects of controlling pore sizes, pore volumes and pore size distributions as well as functionalization of these supports. Finally, selected, recent applications in separation science, (bio-) catalysis and chip technology will be summarized. © 2007 Elsevier Ltd. All rights reserved.
  • Thumbnail Image
    Item
    VPN Seat - drahtloses virtuelles Netzwerk für die Kommunikation durch den Passagier : Abschlußbericht für Verbundprojekt VPN Seat
    (Hannover : Technische Informationsbibliothek (TIB), 2010) Langendörfer, Peter; Maye, Oliver
    [no abstract available]
  • Thumbnail Image
    Item
    Nanoscopic tip sensors fabricated by gas phase etching of optical glass fibers
    (Heidelberg : Springer, 2012) Bierlich, J.; Kobelke, J.; Brand, D.; Kirsch, K.; Dellith, J.; Bartelt, H.
    Silica-based fiber tips are used in a variety of spectroscopic, micro- or nano-scopic optical sensor applications and photonic micro-devices. The miniaturization of optical sensor systems and the technical implementation using optical fibers can provide new sensor designs with improved properties and functionality for new applications. The selective-etching of specifically doped silica fibers is a promising method in order to form complex photonic micro structures at the end or within fibers such as tips and cavities in various shapes useful for the all-fiber sensor and imaging applications. In the present study, we investigated the preparation of geometrically predefined, nanoscaled fiber tips by taking advantage of the dopant concentration profiles of highly doped step-index fibers. For this purpose, a gas phase etching process using hydrofluoric acid (HF) vapor was applied. The shaping of the fiber tips was based on very different etching rates as a result of the doping characteristics of specific optical fibers. Technological studies on the influence of the etching gas atmosphere on the temporal tip shaping and the final geometry were performed using undoped and doped silica fibers. The influence of the doping characteristics was investigated in phosphorus-, germanium-, fluorine- and boron-doped glass fibers. Narrow exposed as well as protected internal fiber tips in various shapes and tip radiuses down to less than 15 nm were achieved and characterized geometrically and topologically. For investigations into surface plasmon resonance effects, the fiber tips were coated with nanometer-sized silver layers by means of vapour deposition and finally subjected to an annealing treatment.
  • Thumbnail Image
    Item
    Promoting abnormal grain growth in Fe-based shape memory alloys through compositional adjustments
    (London : Nature Publishing Group, 2019) Vollmer, M.; Arold, T.; Kriegel, M.J.; Klemm, V.; Degener, S.; Freudenberger, J.; Niendorf, T.
    Iron-based shape memory alloys are promising candidates for large-scale structural applications due to their cost efficiency and the possibility of using conventional processing routes from the steel industry. However, recently developed alloy systems like Fe–Mn–Al–Ni suffer from low recoverability if the grains do not completely cover the sample cross-section. To overcome this issue, here we show that small amounts of titanium added to Fe–Mn–Al–Ni significantly enhance abnormal grain growth due to a considerable refinement of the subgrain sizes, whereas small amounts of chromium lead to a strong inhibition of abnormal grain growth. By tailoring and promoting abnormal grain growth it is possible to obtain very large single crystalline bars. We expect that the findings of the present study regarding the elementary mechanisms of abnormal grain growth and the role of chemical composition can be applied to tailor other alloy systems with similar microstructural features.
  • Thumbnail Image
    Item
    Support for a long lifetime and short end-to-end delays with TDMA protocols in sensor networks
    (London : Hindawi, 2012) Brzozowski, Marcin; Salomon, Hendrik; Langendoerfer, Peter
    This work addresses a tough challenge of achieving two opposing goals: ensuring long lifetimes and supporting short end-to-end delays in sensor networks. Obviously, sensor nodes must wake up often to support short delays in multi-hop networks. As event occurs seldom in common applications, most wake-up are useless: nodes waste energy due to idle listening. We introduce a set of solutions, referred to as LETED (limiting end-to-end delays), which shorten the wake-up periods, reduce idle listening, and save energy. We exploit hardware features of available transceivers that allow early detection of idle wake-up periods. This feature is introduced on top of our approach to reduce idle listening stemming from clock drift owing to the estimation of run-time drift. To evaluate LETED and other MAC protocols that support short end-to-end delays we present an analytical model, which considers almost 30 hardware and software parameters. Our evaluation revealed that LETED reduces idle listening by 15x and more against similar solutions. Also, LETED outperforms other protocols and provides significant longer lifetimes. For example, nodes with LETED work 8x longer than those with a common TDMA and 2x-3x longer than with protocols based on preamble sampling, like B-MAC.
  • Thumbnail Image
    Item
    Influence of carbon substrate on the electrochemical performance of carbon/manganese oxide hybrids in aqueous and organic electrolytes
    (Cambridge : Royal Society of Chemistry, 2016) Zeiger, Marco; Fleischmann, Simon; Krüner, Benjamin; Tolosa, Aura; Bechtel, Stephan; Baltes, Mathias; Schreiber, Anna; Moroni, Riko; Vierrath, Severin; Thiele, Simon; Presser, Volker
    Manganese oxide presents very promising electrochemical properties as an electrode material in supercapacitors, but there remain important open questions to guide further development of the complex manganese oxide/carbon/electrolyte system. Our work addresses specifically the influence of carbon ordering and the difference between outer and inner porosity of carbon particles for the application in aqueous 1 M Na2SO4 and 1 M LiClO4 in acetonitrile. Birnessite-type manganese oxide was hydrothermally hybridized on two kinds of carbon onions with only outer surface area and different electrical conductivity, and conventional activated carbon with a high inner porosity. Carbon onions with a high degree of carbon ordering, high conductivity, and high outer surface area were identified as the most promising material, yielding 179 F g−1. Pore blocking in activated carbon yields unfavorable electrochemical performances. The highest specific energy of 16.4 W h kg−1 was measured for a symmetric full-cell arrangement of manganese oxide coated high temperature carbon onions in the organic electrolyte. High stability during 10 000 cycles was achieved for asymmetric full-cells, which proved as a facile way to enhance the electrochemical performance stability.
  • Thumbnail Image
    Item
    Effect of nematic ordering on electronic structure of FeSe
    (London : Nature Publishing Group, 2016) Fedorov, A.; Yaresko, A.; Kim, T.K.; Kushnirenko, Y.; Haubold, E.; Wolf, T.; Hoesch, M.; Grüneis, A.; Büchner, B.; Borisenko, S.V.
    Electronically driven nematic order is often considered as an essential ingredient of high-temperature superconductivity. Its elusive nature in iron-based superconductors resulted in a controversy not only as regards its origin but also as to the degree of its influence on the electronic structure even in the simplest representative material FeSe. Here we utilized angle-resolved photoemission spectroscopy and density functional theory calculations to study the influence of the nematic order on the electronic structure of FeSe and determine its exact energy and momentum scales. Our results strongly suggest that the nematicity in FeSe is electronically driven, we resolve the recent controversy and provide the necessary quantitative experimental basis for a successful theory of superconductivity in iron-based materials which takes into account both, spin-orbit interaction and electronic nematicity.