8 results
Search Results
Now showing 1 - 8 of 8
- ItemCombining Battery‐Type and Pseudocapacitive Charge Storage in Ag/Ti3C2Tx MXene Electrode for Capturing Chloride Ions with High Capacitance and Fast Ion Transport(Hoboken, NJ : Wiley, 2020) Liang, Mingxing; Wang, Lei; Presser, Volker; Dai, Xiaohu; Yu, Fei; Ma, JieThe recent advances in chloride‐ion capturing electrodes for capacitive deionization (CDI) are limited by the capacity, rate, and stability of desalination. This work introduces Ti3C2Tx/Ag synthesized via a facile oxidation‐reduction method and then uses it as an anode for chloride‐ion capture in CDI. Silver nanoparticles are formed successfully and uniformly distributed with the layered‐structure of Ti3C2Tx. All Ti3C2Tx/Ag samples are hydrophilic, which is beneficial for water desalination. Ti3C2Tx/Ag samples with a low charge transfer resistance exhibit both pseudocapacitive and battery behaviors. Herein, the Ti3C2Tx/Ag electrode with a reaction time of 3 h exhibits excellent desalination performance with a capacity of 135 mg Cl− g−1 at 20 mA g−1 in a 10 × 10−3 m NaCl solution. Furthermore, low energy consumption of 0.42 kWh kg−1 Cl− and a desalination rate of 1.5 mg Cl− g−1 min−1 at 50 mA g−1 is achieved. The Ti3C2Tx/Ag system exhibits fast rate capability, high desalination capacity, low energy consumption, and excellent cyclability, which can be ascribed to the synergistic effect between the battery and pseudocapacitive behaviors of the Ti3C2Tx/Ag hybrid material. This work provides fundamental insight into the coupling of battery and pseudocapacitive behaviors during Cl− capture for electrochemical desalination.
- ItemContact Aging Enhances Adhesion of Micropatterned Silicone Adhesives to Glass Substrates(Hoboken, NJ : Wiley, 2020) Thiemecke, Jonathan; Hensel, RenéThe transfer of biological concepts into synthetic micropatterned adhesives has recently enabled a new generation of switchable, reversible handling devices. Over the last two decades, many design principles have been explored that helped to understand the underlying mechanics and to optimize such adhesives for certain applications. An aspect that has been overlooked so far is the influence of longer hold times on the adhesive contacts. Exemplarily, the pull‐off stress and work of separation of a micropatterned adhesive specimen are enhanced by factors 3 and 6, respectively, after 1000 min in contact with a glass substrate. In addition to such global measures, the increase of adhesion of all individual micropillars is analyzed. It is found that contact aging varied across the microarray, as it drastically depends on local conditions. Despite great differences on the micropillar scale, the adhesion of entire specimens increased with very similar power laws, as this is determined by the mean contact ageing of the individual structures. Overall, contact aging must be critically evaluated before using micropatterned adhesives, especially for long‐term fixations and material combinations that are chemically attractive to each other.
- ItemLabel‐Free Imaging of Cholesterol Assemblies Reveals Hidden Nanomechanics of Breast Cancer Cells(Hoboken, NJ : Wiley, 2020) Dumitru, Andra C.; Mohammed, Danahe; Maja, Mauriane; Yang, Jinsung; Verstraeten, Sandrine; del Campo, Aranzazu; Mingeot-Leclercq, Marie-Paule; Tyteca, Donatienne; Alsteens, DavidTumor cells present profound alterations in their composition, structural organization, and functional properties. A landmark of cancer cells is an overall altered mechanical phenotype, which so far are linked to changes in their cytoskeletal regulation and organization. Evidence exists that the plasma membrane (PM) of cancer cells also shows drastic changes in its composition and organization. However, biomechanical characterization of PM remains limited mainly due to the difficulties encountered to investigate it in a quantitative and label‐free manner. Here, the biomechanical properties of PM of a series of MCF10 cell lines, used as a model of breast cancer progression, are investigated. Notably, a strong correlation between the cell PM elasticity and oncogenesis is observed. The altered membrane composition under cancer progression, as emphasized by the PM‐associated cholesterol levels, leads to a stiffening of the PM that is uncoupled from the elastic cytoskeletal properties. Conversely, cholesterol depletion of metastatic cells leads to a softening of their PM, restoring biomechanical properties similar to benign cells. As novel therapies based on targeting membrane lipids in cancer cells represent a promising approach in the field of anticancer drug development, this method contributes to deciphering the functional link between PM lipid content and disease.
- ItemHigh glucose distinctively regulates Ca2+ influx in cytotoxic T lymphocytes upon target recognition and thapsigargin stimulation(Hoboken, NJ : Wiley, 2020) Zou, Huajiao; Yang, Wenjuan; Schwär, Gertrud; Zhao, Renping; Alansary, Dalia; Yin, Deling; Schwarz, Eva C.; Niemeyer, Barbara A.; Qu, BinIn CTLs: High glucose‐culture enhances thapsigargin‐induced SOCE but decreases target recognition‐induced Ca2+ influx. High glucose‐culture regulates expression of ORAIs and STIMs without affecting glucose uptake. More high glucose‐cultured CTLs are prone to necrosis after execution of killing.
- ItemHybrid Anodes of Lithium Titanium Oxide and Carbon Onions for Lithium‐Ion and Sodium‐Ion Energy Storage(Hoboken, NJ : Wiley, 2020) Shim, Hwirim; Arnold, Stefanie; Budak, Öznil; Ulbricht, Maike; Srimuk, Pattarachai; Presser, VolkerThis study demonstrates the hybridization of Li4Ti5O12 (LTO) with different types of carbon onions synthesized from nanodiamonds. The carbon onions mixed with a Li4Ti5Ox precursor for sol–gel synthesis. These hybrid materials are tested as anodes for both lithium‐ion battery (LIB) and sodium‐ion battery (SIB). Electrochemical characterization for LIB application is carried out using 1 m LiPF6 in a 1:1 (by volume) ethylene carbonate and dimethyl carbonate as the electrolyte. For lithium‐ion intercalation, LTO hybridized with carbon onions from the inert‐gas route achieves an excellent electrochemical performance of 188 mAh g−1 at 10 mA g−1, which maintains 100 mAh g−1 at 1 A g−1 and has a cycling stability of 96% of initial capacity after 400 cycles, thereby outperforming both neat LTO and LTO with onions obtained via vacuum treatment. The performance of the best‐performing hybrid material (LTO with carbon onions from argon annealing) in an SIB is tested, using 1 m NaClO4 in ethylene/dimethyl/fluoroethylene carbonate (19:19:2 by mass) as the electrolyte. A maximum capacity of 102 mAh g−1 for the SIB system is obtained, with a capacity retention of 96% after 500 cycles.
- ItemEmerging Roles of 1D Vertical Nanostructures in Orchestrating Immune Cell Functions(Hoboken, NJ : Wiley, 2020) Chen, Yaping; Wang, Ji; Li, Xiangling; Hu, Ning; Voelcker, Nicolas H.; Xie, Xi; Elnathan, RoeyEngineered nano–bio cellular interfaces driven by 1D vertical nanostructures (1D‐VNS) are set to prompt radical progress in modulating cellular processes at the nanoscale. Here, tuneable cell–VNS interfacial interactions are probed and assessed, highlighting the use of 1D‐VNS in immunomodulation, and intracellular delivery into immune cells—both crucial in fundamental and translational biomedical research. With programmable topography and adaptable surface functionalization, 1D‐VNS provide unique biophysical and biochemical cues to orchestrate innate and adaptive immunity, both ex vivo and in vivo. The intimate nanoscale cell–VNS interface leads to membrane penetration and cellular deformation, facilitating efficient intracellular delivery of diverse bioactive cargoes into hard‐to‐transfect immune cells. The unsettled interfacial mechanisms reported to be involved in VNS‐mediated intracellular delivery are discussed. By identifying up‐to‐date progress and fundamental challenges of current 1D‐VNS technology in immune‐cell manipulation, it is hoped that this report gives timely insights for further advances in developing 1D‐VNS as a safe, universal, and highly scalable platform for cell engineering and enrichment in advanced cancer immunotherapy such as chimeric antigen receptor‐T therapy.
- ItemA novel universal algorithm for filament network tracing and cytoskeleton analysis(Hoboken, NJ : Wiley, 2021) Flormann, Daniel A.D.; Schu, Moritz; Terriac, Emmanuel; Thalla, Divyendu; Kainka, Lucina; Koch, Marcus; Gad, Annica K.B.; Lautenschläger, FranziskaThe rapid development of advanced microscopy techniques over recent decades has significantly increased the quality of imaging and our understanding of subcellular structures, such as the organization of the filaments of the cytoskeleton using fluorescence and electron microscopy. However, these recent improvements in imaging techniques have not been matched by similar development of techniques for computational analysis of the images of filament networks that can now be obtained. Hence, for a wide range of applications, reliable computational analysis of such two-dimensional methods remains challenging. Here, we present a new algorithm for tracing of filament networks. This software can extract many important parameters from grayscale images of filament networks, including the mesh hole size, and filament length and connectivity (also known as Coordination Number). In addition, the method allows sub-networks to be distinguished in two-dimensional images using intensity thresholding. We show that the algorithm can be used to analyze images of cytoskeleton networks obtained using different advanced microscopy methods. We have thus developed a new improved method for computational analysis of two-dimensional images of filamentous networks that has wide applications for existing imaging techniques. The algorithm is available as open-source software.
- ItemAcid‐Base Interactions of Pyrazine, Ethyl Acetate, Di‐alcohols, and Lysine with the cyclic Alumosiloxane (Ph2SiO)8[Al(O)OH]4 in View of Mimicking Al2O3(H2O) Surface Reactions(Hoboken, NJ : Wiley, 2020) Veith, Michael; Kolano, David; Huch, VolkerThe etherate of (Ph2SiO)8[Al(O)OH]4 can be transformed into the pyrazine adduct (Ph2SiO)8[Al(O)OH]4·3N(C2H2)2N (1), the ethyl acetate adduct (Ph2SiO)8[Al(O)OH]4·3H3C‐C(O)OC2H5 (2), the 1,6‐hexane diol adduct (Ph2SiO)8[Al(O)OH]4·2HO–CH2(CH2)4CH2–OH (3) and the 1,4‐cyclohexane diol adduct (Ph2SiO)8[Al(O)OH]4·4HO–CH(CH2CH2)2CH–OH (4). In all compounds the OH groups of the starting material bind to the bases through O–H···N (1) or O–H···O hydrogen bonds (2, 3, 4) as found from single‐crystal X‐ray diffraction analyses. Whereas in 1 only three of the central OH groups bind to the pyrazines, in 2 two of them bind to the same carbonyl oxygen atom of the ethyl acetate resulting in an unprecedented O–H···O···H–O double hydrogen bridge. The hexane diol adduct 3 in the crystal forms a one‐dimensional coordination polymer with an intramolecularly to two OH groups grafted hexane diol loop, while the second hexane diol is connecting intermolecularly. In the cyclohexane diol adduct 4 all OH groups of the central Al4(OH)4 ring bind to different diols, leaving one alcohol group per diol uncoordinated. These “free” OH groups form an (O‐H···)4 assembly creating a three‐dimensional overall structure. When reacting with (Ph2SiO)8[Al(O)OH]4 lysine loses water, turns into the cyclic 3‐amino‐2‐azepanone, and transforms through chelation of one of the aluminum atoms the starting material into a new polycycle. The isolated compound has the composition (Ph2SiO)12[Al(O)OH]4[Al2O3]2·4 C6H12N2O·6(CH2)4O (5).