Search Results
Saturation of the anomalous Hall effect at high magnetic fields in altermagnetic RuO2
2023, Tschirner, Teresa, Keßler, Philipp, Gonzalez Betancourt, Ruben Dario, Kotte, Tommy, Kriegner, Dominik, Büchner, Bernd, Dufouleur, Joseph, Kamp, Martin, Jovic, Vedran, Smejkal, Libor, Sinova, Jairo, Claessen, Ralph, Jungwirth, Tomas, Moser, Simon, Reichlova, Helena, Veyrat, Louis
Observations of the anomalous Hall effect in RuO2 and MnTe have demonstrated unconventional time-reversal symmetry breaking in the electronic structure of a recently identified new class of compensated collinear magnets, dubbed altermagnets. While in MnTe, the unconventional anomalous Hall signal accompanied by a vanishing magnetization is observable at remanence, the anomalous Hall effect in RuO2 is excluded by symmetry for the Néel vector pointing along the zero-field [001] easy-axis. Guided by a symmetry analysis and ab initio calculations, a field-induced reorientation of the Néel vector from the easy-axis toward the [110] hard-axis was used to demonstrate the anomalous Hall signal in this altermagnet. We confirm the existence of an anomalous Hall effect in our RuO2 thin-film samples, whose set of magnetic and magneto-transport characteristics is consistent with the earlier report. By performing our measurements at extreme magnetic fields up to 68 T, we reach saturation of the anomalous Hall signal at a field Hc ≃ 55 T that was inaccessible in earlier studies but is consistent with the expected Néel-vector reorientation field.
Liquid-Core Microstructured Polymer Optical Fiber as Fiber-Enhanced Raman Spectroscopy Probe for Glucose Sensing
2020, Azkune, Mikel, Frosch, Timea, Arrospide, Eneko, Aldabaldetreku, Gotzon, Bikandi, Iñaki, Zubia, Joseba, Popp, Jürgen, Frosch, Torsten
This work reports the development and application of two liquid-core microstructured polymer optical fibers (LC-mPOF) with different microstructure sizes. They are used in a fiber-enhanced Raman spectroscopy sensing platform, with the aim of detecting glucose in aqueous solutions in the clinically relevant range for sodium-glucose cotransporter 2 inhibitor therapy. The sensing platform is tested for low-concentration glucose solutions using each LC-mPOF. Results confirm that a significant enhancement of the Raman signal is achieved in comparison to conventional Raman spectroscopy. Additional measurements are carried out to obtain the valid measurement range, the resolution, and the limit of detection, showing that the LC-mPOF with 66-µm-diameter central hollow core has the highest potential for future clinical applications. Finally, preliminary tests successfully demonstrate glucose identification in urine. © 1983-2012 IEEE.
Cobalt as a promising dopant for producing semi-insulating β -Ga2O3crystals: Charge state transition levels from experiment and theory
2022, Seyidov, Palvan, Varley, Joel B., Galazka, Zbigniew, Chou, Ta-Shun, Popp, Andreas, Fiedler, Andreas, Irmscher, Klaus
Optical absorption and photoconductivity measurements of Co-doped β-Ga2O3 crystals reveal the photon energies of optically excited charge transfer between the Co related deep levels and the conduction or valence band. The corresponding photoionization cross sections are fitted by a phenomenological model considering electron-phonon coupling. The obtained fitting parameters: thermal ionization (zero-phonon transition) energy, Franck-Condon shift, and effective phonon energy are compared with corresponding values predicted by first principle calculations based on density functional theory. A (+/0) donor level ∼0.85 eV above the valence band maximum and a (0/-) acceptor level ∼2.1 eV below the conduction band minimum are consistently derived. Temperature-dependent electrical resistivity measurement at elevated temperatures (up to 1000 K) yields a thermal activation energy of 2.1 ± 0.1 eV, consistent with the position of the Co acceptor level. Furthermore, the results show that Co doping is promising for producing semi-insulating β-Ga2O3 crystals.
Substrate-orientation dependence of β -Ga2O3 (100), (010), (001), and (2 ̄ 01) homoepitaxy by indium-mediated metal-exchange catalyzed molecular beam epitaxy (MEXCAT-MBE)
2020, Mazzolini, P., Falkenstein, A., Wouters, C., Schewski, R., Markurt, T., Galazka, Z., Martin, M., Albrecht, M., Bierwagen, O.
We experimentally demonstrate how In-mediated metal-exchange catalysis (MEXCAT) allows us to widen the deposition window for β-Ga2O3 homoepitaxy to conditions otherwise prohibitive for its growth via molecular beam epitaxy (e.g., substrate temperatures ≥800 °C) on the major substrate orientations, i.e., (010), (001), (2⎯⎯01), and (100) 6°-offcut. The obtained crystalline qualities, surface roughnesses, growth rates, and In-incorporation profiles are shown and compared with different experimental techniques. The growth rates, Γ, for fixed growth conditions are monotonously increasing with the surface free energy of the different orientations with the following order: Γ(010) > Γ(001) > Γ(2⎯⎯01) > Γ(100). Ga2O3 surfaces with higher surface free energy provide stronger bonds to the surface ad-atoms or ad-molecules, resulting in decreasing desorption, i.e., a higher incorporation/growth rate. The structural quality in the case of (2⎯⎯01), however, is compromised by twin domains due to the crystallography of this orientation. Notably, our study highlights β-Ga2O3 layers with high structural quality grown by MEXCAT-MBE not only in the most investigated (010) orientation but also in the (100) and (001) ones. In particular, MEXCAT on the (001) orientation results in both growth rate and structural quality comparable to the ones achievable with (010), and the limited incorporation of In associated with the MEXCAT deposition process does not change the insulating characteristics of unintentionally doped layers. The (001) surface is therefore suggested as a valuable alternative orientation for devices.
Growth of PdCoO2 films with controlled termination by molecular-beam epitaxy and determination of their electronic structure by angle-resolved photoemission spectroscopy
2022, Song, Qi, Sun, Jiaxin, Parzyck, Christopher T., Miao, Ludi, Xu, Qing, Hensling, Felix V. E., Barone, Matthew R., Hu, Cheng, Kim, Jinkwon, Faeth, Brendan D., Paik, Hanjong, King, Phil D. C., Shen, Kyle M., Schlom, Darrell G.
Utilizing the powerful combination of molecular-beam epitaxy (MBE) and angle-resolved photoemission spectroscopy (ARPES), we produce and study the effect of different terminating layers on the electronic structure of the metallic delafossite PdCoO2. Attempts to introduce unpaired electrons and synthesize new antiferromagnetic metals akin to the isostructural compound PdCrO2 have been made by replacing cobalt with iron in PdCoO2 films grown by MBE. Using ARPES, we observe similar bulk bands in these PdCoO2 films with Pd-, CoO2-, and FeO2-termination. Nevertheless, Pd- and CoO2-terminated films show a reduced intensity of surface states. Additionally, we are able to epitaxially stabilize PdFexCo1-xO2 films that show an anomaly in the derivative of the electrical resistance with respect to temperature at 20 K, but do not display pronounced magnetic order.
Evaluation of single-sided nuclear magnetic resonance technology for usage in geosciences
2022, Costabel, Stephan, Hiller, Thomas, Dlugosch, Raphael, Kruschwitz, Sabine, Müller-Petke, Mike
Because of its mobility and ability to investigate exposed surfaces, single-sided (SiS) nuclear magnetic resonance (NMR) technology enables new application fields in geosciences. To test and assess its corresponding potential, we compare longitudinal (T 1) and transverse (T 2) data measured by SiS NMR with those of conventional geoscientific laboratory NMR. We use reference sandstone samples covering a broad range of pore sizes. Our study demonstrates that the lower signal-to-noise ratio of SiS NMR data generally tends to slightly overestimated widths of relaxation time distributions and consequently pore size distributions. While SiS and conventional NMR produce very similar T 1 relaxation data, unbiased SiS NMR results for T 2 measurements can only be expected for fine material, i.e. clayey or silty sediments and soils with main relaxation times below 0.05s . This limit is given by the diffusion relaxation rate due to the gradient in the primary magnetic field associated with the SiS NMR. Above that limit, i.e. for coarse material, the relaxation data is strongly attenuated. If considering the diffusion relaxation time of 0.2 s in the numerical data inversion process, the information content >0.2s is blurred over a range larger than that of conventional NMR. However, our results show that principle range and magnitudes of the relaxation time distributions are reconstructed to some extent. Regarding these findings, SiS NMR can be helpful to solve geoscientific issues, e.g. to assess the hydro-mechanical properties of the walls of underground facilities or to provide local soil moisture data sets for calibrating indirect remote techniques on the regional scale. The greatest opportunity provided by the SiS NMR technology is the acquisition of profile relaxation data for rocks with significant bedding structures at the μm scale. With this unique feature, SiS NMR can support the understanding and modeling of hydraulic and diffusional anisotropy behavior of sedimentary rocks.
Advances in magneto-ionic materials and perspectives for their application
2021, Nichterwitz, M., Honnali Sudheendra, S., Kutuzau, M., Guo, S., Zehner, J., Nielsch, K., Leistner, K.
The possibility of tuning magnetic material properties by ionic means is exciting both for basic science and, especially in view of the excellentenergy efficiency and room temperature operation, for potential applications. In this perspective, we shortly introduce the functionality ofmagneto-ionic materials and focus on important recent advances in this field. We present a comparative overview of state-of-the-art magneto-ionic materials considering the achieved magnetoelectric voltage coefficients for magnetization and coercivity and the demonstrated timescales for magneto-ionic switching. Furthermore, the application perspectives of magneto-ionic materials in data storage and computing,magnetic actuation, and sensing are evaluated. Finally, we propose potential research directions to push this field forward and tackle thechallenges related to future applications
Modulation Linearity Characterization of Si Ring Modulators
2021, Jo, Youngkwan, Mai, Christian, Lischke, Stefan, Zimmermann, Lars, Choi, Woo-Young
Modulation linearity of Si ring modulators (RMs) is investigated through the numerical simulation based on the coupled-mode theory and experimental verification. Numerical values of the key parameters needed for the simulation are experimentally extracted. Simulation and measurement results agree well. With these, the influence of input optical wavelength and power on the Si RM linearity are characterized.
Role of topology in compensated magnetic systems
2024, Reichlova, Helena, Kriegner, Dominik, Mook, Alexander, Althammer, Matthias, Thomas, Andy
Topology plays a crucial and multifaceted role in solid state physics, leading to a remarkable array of newly investigated materials and phenomena. In this Perspective, we provide a brief summary of well-established model materials with a particular focus on compensated magnets and highlight key phenomena that emerge due to the influence of topology in these systems. The overview covers various magneto-transport phenomena, with a particular focus on the extensively investigated anomalous magneto-transport effects. Furthermore, we look into the significance of topology in understanding elementary magnetic excitations, namely magnons, where the role of topology gained considerable attention from both theoretical and experimental perspectives. Since electrons and magnons carry energy, we explore the implications of topology in combined heat and spin transport experiments in compensated magnetic systems. At the end of each section, we highlight intriguing unanswered questions in this research direction. To finally conclude, we offer our perspective on what could be the next advancements regarding the interaction between compensated magnetism and topology.
Epitaxial stannate pyrochlore thin films: Limitations of cation stoichiometry and electron doping
2021, Hensling, Felix V. E., Dahliah, Diana, Dulal, Prabin, Singleton, Patrick, Sun, Jiaxin, Schubert, Jürgen, Paik, Hanjong, Subedi, Indra, Subedi, Biwas, Rignanese, Gian-Marco, Podraza, Nikolas J., Hautier, Geoffroy, Schlom, Darrell G.
We have studied the growth of epitaxial films of stannate pyrochlores with a general formula A2Sn2O7 (A = La and Y) and find that it is possible to incorporate ∼25% excess of the A-site constituent; in contrast, any tin excess is expelled. We unravel the defect chemistry, allowing for the incorporation of excess A-site species and the mechanism behind the tin expulsion. An A-site surplus is manifested by a shift in the film diffraction peaks, and the expulsion of tin is apparent from the surface morphology of the film. In an attempt to increase La2Sn2O7 conductivity through n-type doping, substantial quantities of tin have been substituted by antimony while maintaining good film quality. The sample remained insulating as explained by first-principles computations, showing that both the oxygen vacancy and antimony-on-tin substitutional defects are deep. Similar conclusions are drawn on Y2Sn2O7. An alternative n-type dopant, fluorine on oxygen, is shallow according to computations and more likely to lead to electrical conductivity. The bandgaps of stoichiometric La2Sn2O7 and Y2Sn2O7 films were determined by spectroscopic ellipsometry to be 4.2 eV and 4.48 eV, respectively. © 2021 Author(s).