19 results
Search Results
Now showing 1 - 10 of 19
- ItemNumerical modelling of climate change impacts on freshwater lenses on the North Sea Island of Borkum using hydrological and geophysical methods(Munich : EGU, 2012) Sulzbacher, H.; Wiederhold, H.; Siemon, B.; Grinat, M.; Igel, J.; Burschil, T.; Günther, T.; Hinsby, K.A numerical, density dependent groundwater model is set up for the North Sea Island of Borkum to estimate climate change impacts on coastal aquifers and especially the situation of barrier islands in the Wadden Sea. The database includes information from boreholes, a seismic survey, a helicopter-borne electromagnetic (HEM) survey, monitoring of the freshwater-saltwater boundary by vertical electrode chains in two boreholes, measurements of groundwater table, pumping and slug tests, as well as water samples. Based on a statistical analysis of borehole columns, seismic sections and HEM, a hydrogeological model is set up. The groundwater model is developed using the finite-element programme FEFLOW. The density dependent groundwater model is calibrated on the basis of hydraulic, hydrological and geophysical data, in particular spatial HEM and local monitoring data. Verification runs with the calibrated model show good agreement between measured and computed hydraulic heads. A good agreement is also obtained between measured and computed density or total dissolved solids data for both the entire freshwater lens on a large scale and in the area of the well fields on a small scale. For simulating future changes in this coastal groundwater system until the end of the current century, we use the climate scenario A2, specified by the Intergovernmental Panel on Climate Change and, in particular, the data for the German North Sea coast. Simulation runs show proceeding salinisation with time beneath the well fields of the two waterworks Waterdelle and Ostland. The modelling study shows that the spreading of well fields is an appropriate protection measure against excessive salinisation of the water supply until the end of the current century.
- ItemError control for the approximation of Allen-Cahn and Cahn-Hilliard equations with a logarithmic potential(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2010) Bartels, Sören; Müller, RüdigerA fully computable upper bound for the finite element approximation error of Allen-Cahn and Cahn-Hilliard equations with logarithmic potentials is derived. Numerical experiments show that for the sharp interface limit this bound is robust past topological changes. Modifications of the abstract results to derive quasi-optimal error estimates in different norms for lowest order finite element methods are discussed and lead to weaker conditions on the residuals under which the conditional error estimates hold.
- ItemNumerical analysis for nematic electrolytes(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2020) Baňas, L'ubomír; Lasarzik, Robert; Prohl, AndreasWe consider a system of nonlinear PDEs modeling nematic electrolytes, and construct a dissipative solution with the help of its implementable, structure-inheriting space-time discretization. Computational studies are performed to study the mutual effects of electric, elastic, and viscous effects onto the molecules in a nematic electrolyte.
- ItemExistence of solutions of a finite element flux-corrected-transport scheme(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2020) John, Volker; Knobloch, PetrThe existence of a solution is proved for a nonlinear finite element flux-corrected-transport (FEM-FCT) scheme with arbitrary time steps for evolutionary convection-diffusion-reaction equations and transport equations.
- ItemA reduced-order modeling for efficient design study of artificial valve in enlarged ventricular outflow tracts(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2015) Caiazzo, Alfonso; Guibert, Romain; Vignon-Clementel, Irene E.A computational approach is proposed for efficient design study of a reducer stent to be percutaneously implanted in enlarged right ventricular outflow tracts (RVOT). The need for such a device is driven by the absence of bovine or artificial valves which could be implanted in these RVOT to replace the absent or incompetent native valve, as is often the case over time after Tetralogy of Fallot repair. Hemodynamics are simulated in the stented RVOT via a reduce order model based on proper orthogonal decomposition (POD), while the artificial valve is modeled as a thin resistive surface. The reduced order model is obtained from the numerical solution on a reference device configuration, then varying the geometrical parameters (diameter) for design purposes. To validate the approach, forces exerted on the valve and on the reducer are monitored, varying with geometrical parameters, and compared with the results of full CFD simulations. Such an approach could also be useful for uncertainty quantification. Device design, percutaneous pulmonary valve replacement, proper orthogonal decomposition (POD), finite element method, blood flow CFD, repaired Tetralogy of Fallot.
- ItemOptimal control of a buoyancy-driven liquid steel stirring modeled with single-phase Navier--Stokes equations(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2020) Wilbrandt, Ulrich; Alia, Najib; John, VolkerGas stirring is an important process used in secondary metallurgy. It allows to homogenize the temperature and the chemical composition of the liquid steel and to remove inclusions which can be detrimental for the end-product quality. In this process, argon gas is injected from two nozzles at the bottom of the vessel and rises by buoyancy through the liquid steel thereby causing stirring, i.e., a mixing of the bath. The gas flow rates and the positions of the nozzles are two important control parameters in practice. A continuous optimization approach is pursued to find optimal values for these control variables. The effect of the gas appears as a volume force in the single-phase incompressible NavierStokes equations. Turbulence is modeled with the Smagorinsky Large Eddy Simulation (LES) model. An objective functional based on the vorticity is used to describe the mixing in the liquid bath. Optimized configurations are compared with a default one whose design is based on a setup from industrial practice.
- ItemFunctional a posteriori error estimation for stationary reaction-convection-diffusion problems(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2014) Eigel, Martin; Samrowski, TatianaA functional type a posteriori error estimator for the finite element discretisation of the stationary reaction-convection-diffusion equation is derived. In case of dominant convection, the solution for this class of problems typically exhibits boundary layers and shock-front like areas with steep gradients. This renders the accurate numerical solution very demanding and appropriate techniques for the adaptive resolution of regions with large approximation errors are crucial. Functional error estimators as derived here contain no mesh-dependent constants and provide guaranteed error bounds for any conforming approximation. To evaluate the error estimator, a minimisation problem is solved which does not require any Galerkin orthogonality or any specific properties of the employed approximation space. Based on a set of numerical examples, we assess the performance of the new estimator. It is observed that it exhibits a good efficiency also with convection-dominated problem settings.
- ItemReliable averaging for the primal variable in the Courant FEM and hierarchical error estimators on red-refined meshes(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2016) Carstensen, Carsten; Eigel, MartinA hierarchical a posteriori error estimator for the first-order finite element method (FEM) on a red-refined triangular mesh is presented for the 2D Poisson model problem. Reliability and efficiency with some explicit constant is proved for triangulations with inner angles smaller than or equal to π/2 . The error estimator does not rely on any saturation assumption and is valid even in the pre-asymptotic regime on arbitrarily coarse meshes. The evaluation of the estimator is a simple post-processing of the piecewise linear FEM without any extra solve plus a higher-order approximation term. The results also allows the striking observation that arbitrary local averaging of the primal variable leads to a reliable and efficient error estimation. Several numerical experiments illustrate the performance of the proposed a posteriori error estimator for computational benchmarks.
- ItemA Stokes-consistent backflow stabilization for physiological flows(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2014) Bertoglio, Cristobal; Caiazzo, AlfonsoIn computational fluid dynamics incoming flow at open boundaries, or emphbackflow, often yields to unphysical instabilities for high Reynolds numbers. It is widely accepted that this is due to the incoming energy arising from the convection term, which cannot be empha priori controlled when the velocity field is unknown at the boundary. In order to improve the robustness of the numerical simulations, we propose a stabilized formulation based on a penalization of the residual of a weak Stokes problem on the open boundary, whose viscous part controls the incoming convective energy, while the inertial term contributes to the kinetic energy. We also present different strategies for the approximation of the boundary pressure gradient, which is needed for defining the stabilization term. The method has the advantage that it does not require neither artificial modifications or extensions of the computational domain. Moreover, it is consistent with the Womersley solution. We illustrate our approach on numerical examples
- ItemA tangential regularization method for backflow stabilization in hemodynamics(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2013) Bertoglio, Cristóbal; Caiazzo, AlfonsoIn computational simulations of fluid flows, instabilities at the Neumann boundaries may appear during backflow regime. It is widely accepted that this is due to the incoming energy at the boundary, coming from the convection term, which cannot be controlled when the velocity field is unknown. We propose a stabilized formulation based on a local regularization of the fluid velocity along the tangential directions on the Neumann boundaries. The stabilization term is proportional to the amount of backflow, and does not require any further assumption on the velocity profile. The perfomance of the method is assessed on a twoand three-dimensional Womersley flows, as well as considering a hemodynamic physiological regime in a patient-specific aortic geometry.