19 results
Search Results
Now showing 1 - 10 of 19
- ItemStrain Engineered Electrically Pumped SiGeSn Microring Lasers on Si(Washington, DC : ACS, 2022) Marzban, Bahareh; Seidel, Lukas; Liu, Teren; Wu, Kui; Kiyek, Vivien; Zoellner, Marvin Hartwig; Ikonic, Zoran; Schulze, Joerg; Grützmacher, Detlev; Capellini, Giovanni; Oehme, Michael; Witzens, Jeremy; Buca, DanSiGeSn holds great promise for enabling fully group-IV integrated photonics operating at wavelengths extending in the mid-infrared range. Here, we demonstrate an electrically pumped GeSn microring laser based on SiGeSn/GeSn heterostructures. The ring shape allows for enhanced strain relaxation, leading to enhanced optical properties, and better guiding of the carriers into the optically active region. We have engineered a partial undercut of the ring to further promote strain relaxation while maintaining adequate heat sinking. Lasing is measured up to 90 K, with a 75 K T0. Scaling of the threshold current density as the inverse of the outer circumference is linked to optical losses at the etched surface, limiting device performance. Modeling is consistent with experiments across the range of explored inner and outer radii. These results will guide additional device optimization, aiming at improving electrical injection and using stressors to increase the bandgap directness of the active material.
- ItemModulation Linearity Characterization of Si Ring Modulators(Washington, DC : OSA, 2021) Jo, Youngkwan; Mai, Christian; Lischke, Stefan; Zimmermann, Lars; Choi, Woo-YoungModulation linearity of Si ring modulators (RMs) is investigated through the numerical simulation based on the coupled-mode theory and experimental verification. Numerical values of the key parameters needed for the simulation are experimentally extracted. Simulation and measurement results agree well. With these, the influence of input optical wavelength and power on the Si RM linearity are characterized.
- ItemA physical origin of cross-polarization and higher-order modes in two-dimensional (2D) grating couplers and the related device performance limitations(Bristol : IOP Publishing, 2021) Georgieva, Galina; Voigt, Karsten; Seiler, Pascal M.; Mai, Christian; Petermann, Klaus; Zimmermann, LarsWe explore scattering effects as the physical origin of cross-polarization and higher-order modes in silicon photonic 2D grating couplers (GCs). A simplified analytical model is used to illustrate that in-plane scattering always takes place, independent of grating geometry and design coupling angle. Experimental investigations show furthermore that grating design parameters are especially related to the modal composition of both the target- and the cross-polarization. Scattering effects and the associated cross-polarization and higher-order modes are indicated as the main reason for the higher 2D GC insertion loss compared to standard 1D GCs. In addition, they can be responsible for a variable 2D GC spectrum shape, bandwidth and polarization dependent loss.
- ItemOptimization of Multi-Level Operation in RRAM Arrays for In-Memory Computing(Basel : MDPI, 2021) Pérez, Eduardo; Pérez-Ávila, Antonio Javier; Romero-Zaliz, Rocío; Mahadevaiah, Mamathamba Kalishettyhalli; Pérez-Bosch Quesada, Emilio; Roldán, Juan Bautista; Jiménez-Molinos, Francisco; Wenger, ChristianAccomplishing multi-level programming in resistive random access memory (RRAM) arrays with truly discrete and linearly spaced conductive levels is crucial in order to implement synaptic weights in hardware-based neuromorphic systems. In this paper, we implemented this feature on 4-kbit 1T1R RRAM arrays by tuning the programming parameters of the multi-level incremental step pulse with verify algorithm (M-ISPVA). The optimized set of parameters was assessed by comparing its results with a non-optimized one. The optimized set of parameters proved to be an effective way to define non-overlapped conductive levels due to the strong reduction of the device-to-device variability as well as of the cycle-to-cycle variability, assessed by inter-levels switching tests and during 1 k reset-set cycles. In order to evaluate this improvement in real scenarios, the experimental characteristics of the RRAM devices were captured by means of a behavioral model, which was used to simulate two different neuromorphic systems: an 8 × 8 vector-matrix-multiplication (VMM) accelerator and a 4-layer feedforward neural network for MNIST database recognition. The results clearly showed that the optimization of the programming parameters improved both the precision of VMM results as well as the recognition accuracy of the neural network in about 6% compared with the use of non-optimized parameters.
- ItemModeling Photodetection at the Graphene/Ag2S Interface(Weinheim : Wiley-VCH, 2021) Spirito, Davide; Martín-García, Beatriz; Mišeikis, Vaidotas; Coletti, Camilla; Bonaccorso, Francesco; Krahne, RomanMixed-dimensional systems host interesting phenomena that involve electron and ion transport along or across the interface, with promising applications in optoelectronic and electrochemical devices. Herein, a heterosystem consisting of a graphene monolayer with a colloidal Ag2S nanocrystal film atop, in which both ions and electrons are involved in photoelectrical effects, is studied. An investigation of the transport at the interface in different configurations by using a phototransistor configuration with graphene as a charge-transport layer and semiconductor nanocrystals as a light-sensitive layer is performed. The key feature of charge transfer is investigated as a function of gate voltage, frequency, and incident light power. A simple analytical model of the photoresponse is developed, to gain information on the device operation, revealing that the nanocrystals transfer electrons to graphene in the dark, but the opposite process occurs upon illumination. A frequency-dependence analysis suggests a fractal interface between the two materials. This interface can be modified using solid-state electrochemical reactions, leading to the formation of metallic Ag particles, which affect the graphene properties by additional doping, while keeping the photoresponse. Overall, these results provide analytical tools and guidelines for the evaluation of coupled electron/ion transport in hybrid systems.
- ItemSi photonic-electronic monolithically integrated optical receiver with a built-in temperature-controlled wavelength filter(Washington, DC : Soc., 2021) Kim, Hyun-Kyu; Kim, Minkyu; Kim, Min-Hyeong; Jo, Youngkwan; Lischke, Stefan; Mai, Christian; Zimmermann, Lars; Choi, Woo-YoungWe present a Si photonic-electronic integrated ring-resonator based optical receiver that contains a temperature-controlled ring-resonator filter (RRF), a Ge photodetector, and receiver circuits in a single chip. The temperature controller automatically determines the RRF temperature at which the maximum transmission of the desired WDM signal is achieved and maintains this condition against any temperature or input wavelength fluctuation. This Si photonic-electronic integrated circuit is realized with 0.25-µm photonic BiCMOS technology, and its operation is successfully confirmed with measurement.
- ItemSubnanometer Control of the Heteroepitaxial Growth of Multimicrometer-Thick Ge /(Si, Ge) Quantum Cascade Structures(College Park, Md. [u.a.] : American Physical Society, 2023) Talamas Simola, Enrico; Montanari, Michele; Corley-Wiciak, Cedric; Di Gaspare, Luciana; Persichetti, Luca; Zöllner, Marvin H.; Schubert, Markus A.; Venanzi, Tommaso; Trouche, Marina Cagnon; Ortolani, Michele; Mattioli, Francesco; Sfuncia, Gianfranco; Nicotra, Giuseppe; Capellini, Giovanni; Virgilio, Michele; De Seta, MonicaThe fabrication of complex low-dimensional quantum devices requires the control of the heteroepitaxial growth at the subnanometer scale. This is particularly challenging when the total thickness of stacked layers of device-active material becomes extremely large and exceeds the multi-μm limit, as in the case of quantum cascade structures. Here, we use the ultrahigh-vacuum chemical vapor deposition technique for the growth of multi-μm-thick stacks of high Ge content strain-balanced Ge/SiGe tunneling heterostructures on Si substrates, designed to serve as the active material in a THz quantum cascade laser. By combining thorough structural investigation with THz spectroscopy absorption experiments and numerical simulations we show that the optimized deposition process can produce state-of-the-art threading dislocation density, ultrasharp interfaces, control of dopant atom position at the nanoscale, and reproducibility within 1% of the layer thickness and composition within the whole multilayer. We show that by using ultrahigh-vacuum chemical vapor deposition one achieves simultaneously a control of the epitaxy down to the sub-nm scale typical of the molecular beam epitaxy, and the high growth rate and technological relevance of chemical vapor deposition. Thus, this technique is a key enabler for the deposition of integrated THz devices and other complex quantum structures based on the Ge/SiGe material system.
- ItemHeteroepitaxy of group IV materials for future device application(Bristol : IOP Publ., 2023) Yamamoto, Yuji; Wen, Wei-Chen; Tillack, BerndHeteroepitxy of group IV materials (Si, SiGe, and Ge) has great potential for boosting Si-based novel device performance because of the possibility for strain, band gap/Fermi-level engineering, and applying emerging artificial materials such as a superlattice (SL) and nanodots. In order to control group IV heteroepitaxy processes, strain, interface, and surface energies are very essential parameters. They affect dislocation formation, interface steepness, reflow of deposited layers, and also surface reaction itself during the growth. Therefore, process control and crystallinity management of SiGe heteroepitaxy are difficult especially in the case of high Ge concentrations. In this paper, we review our results of abrupt SiGe/Si interface fabrication by introducing C-delta layers and the influence of strain on the surface reaction of SiGe. Three-dimensional self-ordered SiGe and Ge nanodot fabrication by proactively using strain and surface energies by depositing SiGe/Si and Ge/SiGe SL are also reviewed.
- ItemVertical alignment control of self-ordered multilayered Ge nanodots on SiGe(Bristol : IOP Publ., 2023) Wen, Wei-Chen; Schubert, Markus Andreas; Tillack, Bernd; Yamamoto, YujiSelf-ordered multilayered Ge nanodots with SiGe spacers on a Si0.4Ge0.6 virtual substrate are fabricated using reduced-pressure chemical vapor deposition, and the mechanism of vertical ordering is investigated. The process conditions of Ge and SiGe layer deposition are H2-GeH4 at 550 °C and H2-SiH4-GeH4 at 500 °C-550 °C, respectively. By depositing the SiGe at 550 °C or increasing Ge content, the SiGe surface becomes smooth, resulting in vertically aligned Ge nanodots to reduce strain energy. Ge nanodots prefer to grow on the nanodot where the SiGe is relatively tensile strained due to the buried Ge nanodot underneath. By depositing at 500 °C and lowering Ge content, checkerboard-like surface forms, and the following Ge nanodots grow at staggered positions to reduce surface energy. The Ge nanodots are laterally aligned along the elastically soft 〈100〉 direction without pre-structuring resulting from the strain distribution.
- ItemRaman spectroscopy in layered hybrid organic-inorganic metal halide perovskites(Bristol : IOP Publishing, 2022) Spirito, Davide; Asensio, Yaiza; Hueso, Luis E.; Martín-García, BeatrizThe continuous progress in the synthesis and characterization of materials in the vast family of hybrid organic-inorganic metal halide perovskites (HOIPs) has been pushed by their exceptional properties mainly in optoelectronic applications. These works highlight the peculiar role of lattice vibrations, which strongly interact with electrons, resulting in coupled states affecting the optical properties. Among these materials, layered (2D) HOIPs have emerged as a promising material platform to address some issues of their three-dimensional counterparts, such as ambient stability and ion migration. Layered HOIPs consist of inorganic layers made of metal halide octahedra separated by layers composed of organic cations. They have attracted much interest not only for applications, but also for their rich phenomenology due to their crystal structure tunability. Here, we give an overview of the main experimental findings achieved via Raman spectroscopy in several configurations and set-ups, and how they contribute to shedding light on the complex structural nature of these fascinating materials. We focus on how the phonon spectrum comes from the interplay of several factors. First, the inorganic and organic parts, whose motions are coupled, contribute with their typical modes which are very different in energy. Nonetheless, the interaction between them is relevant, as it results in low-symmetry crystal structures. Then, the role of external stimuli, such as temperature and pressure, which induce phase transitions affecting the spectrum through change in symmetry of the lattice, octahedral tilting and arrangement of the molecules. Finally, the relevant role of the coupling between the charge carriers and optical phonons is highlighted.