15 results
Search Results
Now showing 1 - 10 of 15
- ItemRaman scattering owing to magneto-polaron states in monolayer transition metal dichalcogenides([London] : Springer Nature, 2024) Trallero-Giner, C.; Santiago-Pérez, D. G.; Tkachenko, D. V.; Marques, G. E.; Fomin, V. M.Magneto-optical measurements are fundamental research tools that allow for studying the hitherto unexplored optical transitions and the related applications of topological two-dimensional (2D) transition metal dichalcogenides (TMDs). A theoretical model is developed for the first-order magneto-resonant Raman scattering in a monolayer of TMD. A significant number of avoided crossing points involving optical phonons in the magneto-polaron (MP) spectrum, a superposition of the electron and hole states in the excitation branches, and their manifestations in optical transitions at various light scattering configurations are unique features for these 2D structures. The Raman intensity reveals three resonant splittings of double avoided-crossing levels. The three excitation branches are present in the MP spectrum provoked by the coupling of the Landau levels in the conduction and valence bands via an out-of-plane A1-optical phonon mode. The energy gaps at the anticrossing points in the MP scattering spectrum are revealed as a function of the electron and hole optical deformation potential constants. The resonant MP Raman scattering efficiency profile allows for quantifying the relative contribution of the conduction and valence bands in the formation of MPs. The results obtained are a guideline for controlling MP effects on the magneto-optical properties of TMD semiconductors, which open pathways to novel optoelectronic devices based on 2D TMDs.
- ItemLarge-area high-throughput synthesis of monolayer graphene sheet by Hot filament thermal chemical vapor deposition([London] : Springer Nature, 2012) Hawaldar, Ranjit; Merino, P.; Correia, M. R.; Bdikin, Igor; Grácio, José; Méndez, J.; Martín-Gago, J. A.; Singh, Manoj KumarWe report hot filament thermal CVD (HFTCVD) as a new hybrid of hot filament and thermal CVD and demonstrate its feasibility by producing high quality large area strictly monolayer graphene films on Cu substrates. Gradient in gas composition and flow rate that arises due to smart placement of the substrate inside the Ta filament wound alumina tube accompanied by radical formation on Ta due to precracking coupled with substrate mediated physicochemical processes like diffusion, polymerization etc., led to graphene growth. We further confirmed our mechanistic hypothesis by depositing graphene on Ni and SiO 2/Si substrates. HFTCVD can be further extended to dope graphene with various heteroatoms (H, N, and B, etc.,), combine with functional materials (diamond, carbon nanotubes etc.,) and can be extended to all other materials (Si, SiO2, SiC etc.,) and processes (initiator polymerization, TFT processing) possible by HFCVD and thermal CVD.
- ItemSecondary electron emission under magnetic constraint: from Monte Carlo simulations to analytical solution([London] : Springer Nature, 2021) Costin, ClaudiuThe secondary electron emission process is essential for the optimal operation of a wide range of applications, including fusion reactors, high-energy accelerators, or spacecraft. The process can be influenced and controlled by the use of a magnetic field. An analytical solution is proposed to describe the secondary electron emission process in an oblique magnetic field. It was derived from Monte Carlo simulations. The analytical formula captures the influence of the magnetic field magnitude and tilt, electron emission energy, electron reflection on the surface, and electric field intensity on the secondary emission process. The last two parameters increase the effective emission while the others act the opposite. The electric field effect is equivalent to a reduction of the magnetic field tilt. A very good agreement is shown between the analytical and numerical results for a wide range of parameters. The analytical solution is a convenient tool for the theoretical study and design of magnetically assisted applications, providing realistic input for subsequent simulations.
- ItemStudy of an AC dielectric barrier single micro-discharge filament over a water film([London] : Springer Nature, 2018) Vanraes, Patrick; Nikiforov, Anton; Bogaerts, Annemie; Leys, ChristopheIn the last decades, AC powered atmospheric dielectric barrier discharges (DBDs) in air with a liquid electrode have been proposed as a promising plasma technology with versatile applicability in medicine, agriculture and water treatment. The fundamental features of the micro-discharge filaments that make up this type of plasma have, however, not been studied yet in sufficient detail. In order to address this need, we investigated a single DBD micro-discharge filament over a water film in a sphere-to-sphere electrode configuration, by means of ICCD imaging and optical emission spectroscopy. When the water film temporarily acts as the cathode, the plasma duration is remarkably long and shows a clear similarity with a resistive barrier discharge, which we attribute to the resistive nature of the water film and the formation of a cathode fall. As another striking difference to DBD with solid electrodes, a constant glow-like plasma is observed at the water surface during the entire duration of the applied voltage cycle, indicating continuous plasma treatment of the liquid. We propose several elementary mechanisms that might underlie the observed unique behavior, based on the specific features of a water electrode.
- ItemTowards plasma jet controlled charging of a dielectric target at grounded, biased, and floating potential([London] : Springer Nature, 2022) Slikboer, Elmar; Guaitella, Olivier; Garcia-Caurel, Enrique; Sobota, AnaElectric field and surface charge measurements are presented to understand the dynamics in the plasma–surface interaction of a plasma jet and a dielectric surface. The ITO coated backside of the dielectric allowed to impose a DC bias and thus compare the influence of a grounded, biased and floating potential. When imposing a controlled potential at the back of the target, the periodical charging is directly dependent on the pulse length, irrespective of that control potential. This is because the plasma plume is sustained throughout the pulse. When uncontrolled and thus with a floating potential surface, charge accumulation and potential build-up prevents a sustained plasma plume. An imposed DC bias also leads to a continuous surface charge to be present accumulated on the plasma side to counteract the bias. This can lead to much higher electric fields (55 kV/cm) and surface charge (200 nC/cm2) than observed previously. When the plasma jet is turned off, the continuous surface charge decreased to half its value in 25 ms. These results have implications for surface treatment applications.
- ItemRevealing Plasma-Surface Interaction at Atmospheric Pressure: Imaging of Electric Field and Temperature inside the Targeted Material([London] : Springer Nature, 2020) Slikboer, Elmar; Acharya, Kishor; Sobota, Ana; Garcia-Caurel, Enric; Guaitella, OlivierThe plasma-surface interaction is studied for a low temperature helium plasma jet generated at atmospheric pressure using Mueller polarimetry on an electro-optic target. The influence of the AC kHz operating frequency is examined by simultaneously obtaining images of the induced electric field and temperature of the target. The technique offers high sensitivity in the determination of the temperature variation on the level of single degrees. Simultaneously, the evolution of the electric field in the target caused by plasma-driven charge accumulation can be measured with the threshold of the order of 105 V/m. Even though a specific electro-optic crystal is used to obtain the results, they are generally applicable to dielectric targets under exposure of a plasma jet when they are of 0.5 mm thickness, have a dielectric constant greater than 4 and are at floating potential. Other techniques to examine the induced electric field in a target do not exist to the best of our knowledge, making this technique unique and necessary. The influence of the AC kHz operating frequency is important because many plasma jet designs used throughout the world operate at different frequency which changes the time between the ionization waves and hence the leftover species densities and stability of the plasma. Results for our jet show a linear operating regime between 20 and 50 kHz where the ionization waves are stable and the temperature increases linearly by 25 K. The charge deposition and induced electric fields do not increase significantly but the surface area does increase due to an extended surface propagation. Additionally, temperature mapping using a 100 μm GaAs probe of the plasma plume area has revealed a mild heat exchange causing a heating of several degrees of the helium core while the surrounding air slightly cools. This peculiarity is also observed without plasma in the gas plume.
- ItemA New Silicon Phase with Direct Band Gap and Novel Optoelectronic Properties([London] : Springer Nature, 2015) Guo, Yaguang; Wang, Qian; Kawazoe, Yoshiyuki; Jena, PuruDue to the compatibility with the well-developed Si-based semiconductor industry, there is considerable interest in developing silicon structures with direct energy band gaps for effective sunlight harvesting. In this paper, using silicon triangles as the building block, we propose a new silicon allotrope with a direct band gap of 0.61 eV, which is dynamically, thermally and mechanically stable. Symmetry group analysis further suggests that dipole transition at the direct band gap is allowed. In addition, this new allotrope displays large carrier mobility (∼10 4 cm/V · s) at room temperature and a low mass density (1.71 g/cm 3), making it a promising material for optoelectronic applications.
- ItemIn situ study of nucleation and aggregation phases for nanoparticles grown by laser-driven methods([London] : Springer Nature, 2017) Barberio, M.; Antici, P.In the last decades, nanomaterials and nanotechnologies have become fundamental and irreplaceable in many fields of science and technology. When used in applications, their properties depend on many factors such as size, shape, internal structure and composition. For this, exact knowledge of their structural features is essential when developing fabrication technologies and searching for new types of nanostructures or nanoparticles with specific properties. For the latter, the knowledge of the precise temporal evolution of the growth processes is fundamental when it comes to industrial production and applications. Here we present a method to control, with very high precision, the starting of the aggregation phase during the Laser Ablation in solution growth process. This is obtained by monitoring the optical absorption of the colloidal solution. We apply this control method on the most popular metallic nanoparticle materials (Ag, Al, Co, and Ti) and verify the technique using morphological analysis conducted by AFM and SEM microscopy. The experimental results are explained in terms of Mie extinction theory and Thermal Model for Laser Ablation.
- ItemThe effect of ageing on the mechanical properties of the silk of the bridge spider Larinioides cornutus (Clerck, 1757)([London] : Springer Nature, 2016) Lepore, Emiliano; Isaia, Marco; Mammola, Stefano; Pugno, NicolaSpider silk is regarded as one of the best natural polymer fibers especially in terms of low density, high tensile strength and high elongation until breaking. Since only a few bio-engineering studies have been focused on spider silk ageing, we conducted nano-tensile tests on the vertical naturally spun silk fibers of the bridge spider Larinioides cornutus (Clerck, 1757) (Arachnida, Araneae) to evaluate changes in the mechanical properties of the silk (ultimate stress and strain, Youngs modulus, toughness) over time. We studied the natural process of silk ageing at different time intervals from spinning (20 seconds up to one month), comparing silk fibers spun from adult spiders collected in the field. Data were analyzed using Linear Mixed Models. We detected a positive trend versus time for the Youngs modulus, indicating that aged silks are stiffer and possibly less effective in catching prey. Moreover, we observed a negative trend for the ultimate strain versus time, attesting a general decrement of the resistance force. These trends are interpreted as being due to the drying of the silk protein chains and the reorientation among the fibers.
- ItemLaser-Plasma Driven Synthesis of Carbon-Based Nanomaterials([London] : Springer Nature, 2017) Barberio, M.; Antici, P.In this paper we introduce a laser-plasma driven method for the production of carbon based nanomaterials and in particular bi-And few-layers of Graphene. This is obtained by using laser-plasma exfoliation of amorphous Graphite in a liquid solution, employing a laser with energy in the order of 0.5 J/mm2. Raman and XPS analysis of a carbon colloidal performed at different irradiation stages indicate the formation of Graphene multilayers with an increasing number of layers: The amount of layers varies from a monolayer obtained in the first few seconds of the laser irradiation, up to two layers obtained after 10 s, and finally to Graphite and amorphous carbon obtained after 40 s of irradiation. The obtained colloidals are pure, without any presence of impurities or Graphene oxides, and can easily be deposited onto large surfaces (in the order of cm2) for being characterized or for being used in diverse applications.