Search Results
Impact of cold atmospheric pressure plasma processing on storage of blueberries
2020, Pathak, Namrata, Grossi Bovi, Graziele, Limnaios, Athanasios, Fröhling, Antje, Brincat, Jean-Pierre, Taoukis, Petros, Valdramidis, Vasilis P., Schlüter, Oliver
The current study aimed at investigating the impact of nitrogen (N)-generated cold atmospheric pressure plasma (CAPP) treatment on blueberries focusing on the overall impact on berry quality and microbial load along a storage period of 10 days. Blueberries were treated for 0 (control), 5, and 10 min. Assessment of fruit quality (°Bx, ascorbic acid, anthocyanins, titratable acidity, elasticity, and color parameters) and microbial analysis was performed. Results showed that CAPP treatment was more effective in inhibiting bacterial growth than fungal growth and during the subsequent storage, the quality parameters did not differ significantly from the control, under the same conditions. The study supports N-generated CAPP as a disinfection technique to reduce microbial load in blueberries without significantly impacting most quality parameters. Practical applications: Over the last decades, foodborne illness outbreaks around the world have been associated with berries. For that reason, due to the increasing consumption of berries it is paramount to study technologies that can eliminate pathogens responsible for such outbreaks. Cold atmospheric pressure plasma (CAPP) can be a promising technology to be used as an alternative to traditional decontamination methods of food. In this context, this study explored the effect and efficiency of this novel technology on reduction of native microflora and its impact on the physical and chemical properties of blueberries treated by nitrogen (N)-generated CAPP with subsequent storage of 10 days. Results of this work confirmed that such technology has high potential application for decontamination of berries without significantly impacting most quality parameters and thereby can be a potential technology for industrial applications. © 2020 The Authors. Journal of Food Processing and Preservation published by Wiley Periodicals LLC.
The combination of plasma-processed air (PPA) and plasma-treated water (PTW) causes synergistic inactivation of Candida albicans SC5314
2020, Schnabel, Uta, Yarova, Kateryna, Zessin, Björn, Stachowiak, Jörg, Ehlbeck, Jörg
Microwave-induced plasma was used for the generation of plasma-processed air (PPA) and plasma-treated water (PTW). By this way, the plasma was able to functionalize the compressed air and the used water to antimicrobial effective agents. Their fungicidal effects by single and combined application were investigated on Candida albicans strain SC5314. The monoculture of C. albicans was cultivated on specimens with polymeric surface structures (PE-stripes). The additive as well as the synergistic fungicidal potential of PPA and PTW was investigated by different process windows of plasma exposure time (5-50 s) and sample treatment time with PPA/PTW (1-5 min). For a single PTW or PPA treatment, an increase in the reduction factor with the indicated treatment time was observed (maximum reduction factor of 1.1 and 1.6, respectively). In comparison, the combined application of PTW and then PPA resulted in antagonistic, additive and synergistic effects, depending on the combination. An application of the synergistically acting processes of PTW for cleaning and PPA for drying can be an innovative alternative to the sanitary processes currently used in production plants. © 2020 by the authors.
Plasma Medicine Technologies
2021, Kaushik, Nagendra Kumar, Bekeschus, Sander, Tanaka, Hiromasa, Lin, Abraham, Choi, Eun Ha
This Special Issue, entitled “Plasma Medicine Technologies”, covers the latest remarkable developments in the field of plasma bioscience and medicine. Plasma medicine is an interdisciplinary field that combines the principles of plasma physics, material science, bioscience, and medicine, towards the development of therapeutic strategies. A study on plasma medicine has yielded the development of new treatment opportunities in medical and dental sciences. An important aspect of this issue is the presentation of research underlying new therapeutic methods that are useful in medicine, dentistry, sterilization, and, in the current scenario, that challenge perspectives in biomedical sciences. This issue is focused on basic research on the characterization of the bioplasma sources applicable to living cells, especially to the human body, and fundamental research on the mutual interactions between bioplasma and organic–inorganic liquids, and bio or nanomaterials.
Plasma-treated air and water-assessment of synergistic antimicrobial effects for sanitation of food processing surfaces and environment
2019, Schnabel, Uta, Handorf, Oliver, Yarova, Kateryna, Zessin, Björn, Zechlin, Susann, Sydow, Diana, Zellmer, Elke, Stachowiak, Jörg, Andrasch, Mathias, Below, Harald, Ehlbeck, Jörg
The synergistic antimicrobial effects of plasma-processed air (PPA) and plasma-treated water (PTW), which are indirectly generated by a microwave-induced non-atmospheric pressure plasma, were investigated with the aid of proliferation assays. For this purpose, microorganisms (Listeria monocytogenes, Escherichia coli, Pectobacterium carotovorum, sporulated Bacillus atrophaeus) were cultivated as monocultures on specimens with polymeric surface structures. Both the distinct and synergistic antimicrobial potential of PPA and PTW were governed by the plasma-on time (5–50 s) and the treatment time of the specimens with PPA/PTW (1–5 min). In single PTW treatment of the bacteria, an elevation of the reduction factor with increasing treatment time could be observed (e.g., reduction factor of 2.4 to 3.0 for P. carotovorum). In comparison, the combination of PTW and subsequent PPA treatment leads to synergistic effects that are clearly not induced by longer treatment times. These findings have been valid for all bacteria (L. monocytogenes > P. carotovorum = E. coli). Controversially, the effect is reversed for endospores of B. atrophaeus. With pure PPA treatment, a strong inactivation at 50 s plasma-on time is detectable, whereas single PTW treatment shows no effect even with increasing treatment parameters. The use of synergistic effects of PTW for cleaning and PPA for drying shows a clear alternative for currently used sanitation methods in production plants. Highlights: Non-thermal atmospheric pressure microwave plasma source used indirect in two different modes—gaseous and liquid; Measurement of short and long-living nitrite and nitrate in corrosive gas PPA (plasma-processed air) and complex liquid PTW (plasma-treated water); Application of PTW and PPA in single and combined use for biological decontamination of different microorganisms.
Characterization of antimicrobial effects of Plasma-Treated Water (PTW) produced by Microwave-Induced Plasma (MidiPLexc) on pseudomonas fluorescens biofilms
2020, Handorf, Oliver, Pauker, Viktoria Isabella, Schnabel, Uta, Weihe, Thomas, Freund, Eric, Bekeschus, Sander, Riedel, Katharina, Ehlbeck, Jörg
For the decontamination of surfaces in the food production industry, plasma-generated compounds such as plasma-treated water or plasma-processed air offer many promising possibilities for future applications. Therefore, the antimicrobial effect of water treated with microwave-induced plasma (MidiPLexc) on Pseudomonas fluorescens biofilms was investigated. A total of 10 mL deionized water was treated with the MidiPLexc plasma source for 100, 300 and 900 s (pretreatment time) and the bacterial biofilms were exposed to the plasma-treated water for 1, 3 and 5 min (post-treatment time). To investigate the influence of plasma-treated water on P. fluorescens biofilms, microbiological assays (colony-forming units, fluorescence and XTT assay) and imaging techniques (fluorescence microscopy, confocal laser scanning microscopy, and atomic force microscopy) were used. The colony-forming units showed a maximum reduction of 6 log10 by using 300 s pretreated plasma water for 5 min. Additionally, a maximum reduction of 81% for the viability of the cells and a 92% reduction in the metabolic activity of the cells were achieved by using 900 s pretreated plasma water for 5 min. The microscopic images showed evident microbial inactivation within the biofilm even at the shortest pretreatment (100 s) and post-treatment (1 min) times. Moreover, reduction of the biofilm thickness and increased cluster formation within the biofilm was detected. Morphologically, the fusion of cell walls into a uniform dense cell mass was detectable. The findings correlated with a decrease in the pH value of the plasma-treated water, which forms the basis for the chemically active components of plasma-treated water and its antimicrobial effects. These results provide valuable insights into the mechanisms of inactivation of biofilms by plasma-generated compounds such as plasma-treated water and thus allow for further parameter adjustment for applications in food industry. © 2020 by the authors.
Cold atmospheric pressure plasma and low energy electron beam as alternative nonthermal decontamination technologies for dry food surfaces: A review
2018, Hertwig, Christian, Meneses, Nicolas, Mathys, Alexander
Background: Dry food products are often highly contaminated, and dry stress-resistant microorganisms, such as certain types of Salmonella and bacterial spores, can be still viable and multiply if the product is incorporated into high moisture food products or rehydrated. Traditional technologies for the decontamination of these products have certain limitations and drawbacks, such as alterations of product quality, environmental impacts, carcinogenic potential and/or lower consumer acceptance. Cold atmospheric pressure plasma (CAPP) and low energy electron beam (LEEB) are two promising innovative technologies for microbial inactivation on dry food surfaces, which have shown potential to solve these certain limitations. Scope and approach: This review critically summarizes recent studies on the decontamination of dry food surfaces by CAPP and LEEB. Furthermore, proposed inactivation mechanisms, product-process interactions, current limitations and upscaling potential, as well as future trends and research needs for both emerging technologies, are discussed. Key findings and conclusions: CAPP and LEEB are nonthermal technologies with a high potential for the gentle decontamination of dry food surfaces. Both technologies have similarities in their inactivation mechanisms. Due to the limited penetration depth of both technologies, product-process interactions can be minimized by maintaining product quality. A first demonstrator with Technology Readiness Level (TRL) 7 for LEEB has already been introduced into the food industry for the decontamination of herbs and spices. Compared with LEEB, CAPP is at the advanced development stage with TRL 5, for which further work is essential to design systems that are scalable to industrial requirements. © 2018 The Authors