2 results
Search Results
Now showing 1 - 2 of 2
- ItemSub-6 optical-cycle Kerr-lens mode-locked Tm:Lu2O3 and Tm:Sc2O3 combined gain media laser at 2.1 μm(Washington, DC : Soc., 2021) Suzuki, Anna; Kränkel, Christian; Tokurakawa, MasakiWe present a combined gain media Kerr-lens mode-locked laser based on a Tm:Lu2O3 ceramic and a Tm:Sc2O3 single crystal. Pulses as short as 41 fs, corresponding to less than 6 optical cycles, were obtained with an average output power of 42 mW at a wavelength of 2.1 μm and a repetition rate of 93.3 MHz. Furthermore, a maximum average power of 316 mW with a pulse duration of 73 fs was achieved.
- ItemInfluence of diluted acid mixtures on selective etching of MHz- and kHz-fs-laser inscribed structures in YAG(Washington, DC : OSA, 2021) Hasse, Kore; Kip, Detlef; Kränkel, ChristianWe show that the inscription velocity of fs-laser written structures in YAG crystals can be significantly improved by the use of MHz repetition rates for the writing process. Using a 10 MHz inscription laser, record high writing velocities up to 100 mm/s are achieved. Also, the selective etching process is accelerated using a diluted mixture of 22% H3PO4 and 24% H2SO4. The diluted mixture enables selective etching of up to 9.6 mm long, 1 µm wide and 18 µm high microchannels in 23 days. The etching parameter D of 11.2 µm2/s is a factor of 3 higher than previously reported and the selectivity is even increased by an order of magnitude.