10 results
Search Results
Now showing 1 - 10 of 10
- ItemNovel concept for VCSEL enhanced silicon photonic coherent transceiver(New York, NY : American Inst. of Physics, 2019) Seiler, Pascal M.; Ronniger, Gregor; Troppenz, Ute; Sigmund, Ariane; Moehrle, Martin; Peczek, Anna; Zimmermann, LarsWe present a novel concept for an integrated silicon photonic coherent transceiver using vertical-emitting laser sources at 1550 nm. In a state of the art external modulation configuration, we deploy a VCSEL on the transmit and a HCSEL on the receive side. We demonstrate the feasibility of this approach by externally modulating the VCSEL with QPSK at up to 28 Gbaud. We also perform experiments with the VCSEL-HCSEL configuration in a slave-master optical injection locking setup for future data center interconnects. The results show stable locking conditions and the VCSEL is detuned to perform predominant phase modulation. To the best of our knowledge, this is the first time direct phase modulation of a VCSEL under optical injection locking was demonstrated using two vertically emitting laser sources as master - and slave laser. © 2019 Author(s).
- ItemHigh-Resolution Inkjet Printing of Quantum Dot Light-Emitting Microdiode Arrays(Weinheim : Wiley-VCH Verlag, 2020) Yang, P.; Zhang, L.; Kang, D.J.; Strahl, R.; Kraus, T.The direct printing of microscale quantum dot light-emitting diodes (QLEDs) is a cost-effective alternative to the placement of pre-formed LEDs. The quality of printed QLEDs currently is limited by nonuniformities in droplet formation, wetting, and drying during inkjet printing. Here, optimal ink formulation which can suppress nonuniformities at the pixel and array levels is demonstrated. A solvent mixture is used to tune the ejected droplet size, ensure wetting, and provoke Marangoni flows that prevent coffee stain rings. Arrays of green QLED devices are printed at a resolution of 500 pixels in.−1 with a maximum luminance of ≈3000 cd m−2 and a peak current efficiency of 2.8 cd A−1. The resulting array quality is sufficient to print displays at state-of-the-art resolutions.
- ItemTaking some heat off the NDCs? The limited potential of additional short-lived climate forcers’ mitigation(Dordrecht [u.a.] : Springer Science + Business Media B.V, 2019) Harmsen, Mathijs; Fricko, Oliver; Hilaire, Jérôme; van Vuuren, Detlef P.; Drouet, Laurent; Durand-Lasserve, Olivier; Fujimori, Shinichiro; Keramidas, Kimon; Klimont, Zbigniew; Luderer, Gunnar; Aleluia Reis, Lara; Riahi, Keywan; Sano, Fuminori; Smith, Steven J.Several studies have shown that the greenhouse gas reduction resulting from the current nationally determined contributions (NDCs) will not be enough to meet the overall targets of the Paris Climate Agreement. It has been suggested that more ambition mitigations of short-lived climate forcer (SLCF) emissions could potentially be a way to reduce the risk of overshooting the 1.5 or 2 °C target in a cost-effective way. In this study, we employ eight state-of-the-art integrated assessment models (IAMs) to examine the global temperature effects of ambitious reductions of methane, black and organic carbon, and hydrofluorocarbon emissions. The SLCFs measures considered are found to add significantly to the effect of the NDCs on short-term global mean temperature (GMT) (in the year 2040: − 0.03 to − 0.15 °C) and on reducing the short-term rate-of-change (by − 2 to 15%), but only a small effect on reducing the maximum temperature change before 2100. This, because later in the century under assumed ambitious climate policy, SLCF mitigation is maximized, either directly or indirectly due to changes in the energy system. All three SLCF groups can contribute to achieving GMT changes. © 2019, The Author(s).
- ItemA compact laboratory transmission X-ray microscope for the water window(Bristol : Institute of Physics Publishing, 2013) Legall, H.; Stiel, H.; Blobel, G.; Seim, C.; Baumann, J.; Yulin, S.; Esser, D.; Hoefer, M.; Wiesemann, U.; Wirtz, M.; Schneider, G.; Rehbein, S.; Hertz, H.M.In the water window (2.2-4.4 nm) the attenuation of radiation in water is significantly smaller than in organic material. Therefore, intact biological specimen (e.g. cells) can be investigated in their natural environment. In order to make this technique accessible to users in a laboratory environment a Full-Field Laboratory Transmission X-ray Microscope (L-TXM) has been developed. The L-TXM is operated with a nitrogen laser plasma source employing an InnoSlab high power laser system for plasma generation. For microscopy the Ly α emission of highly ionized nitrogen at 2.48 nm is used. A laser plasma brightness of 5 × 1011 photons/(s × sr × μm2 in line at 2.48 nm) at a laser power of 70 W is demonstrated. In combination with a state-of-the-art Cr/V multilayer condenser mirror the sample is illuminated with 106 photons/(μm2 × s). Using objective zone plates 35-40 nm lines can be resolved with exposure times < 60 s. The exposure time can be further reduced to 20 s by the use of new multilayer condenser optics and operating the laser at its full power of 130 W. These exposure times enable cryo tomography in a laboratory environment.
- ItemGaN-based radial heterostructure nanowires grown by MBE and ALD(Bristol : Institute of Physics Publishing, 2013) Lari, L.; Ross, I.M.; Walther, T.; Black, K.; Cheze, C.; Geelhaar, L.; Riechert, H.; Chalker, P.R.A combination of molecular beam epitaxy (MBE) and atomic layer deposition (ALD) was adopted to fabricate GaN-based core/shell NW structures. ALD was used to deposit a HfO2 shell of onto the MBE grown GaN NWs. Electron transparent samples were prepared by focussed ion beam methods and characterized using state-of-the-art analytical transmission and scanning transmission electron microscopy. The polycrystalline coating was found to be uniform along the whole length of the NWs. Photoluminescence and Raman spectroscopy analysis confirms that the HfO2 ALD coating does not add any structural defect when deposited on the NWs.
- ItemToward Reliable Multi-Level Operation in RRAM Arrays: Improving Post-Algorithm Stability and Assessing Endurance/Data Retention(Piscataway : Institute of Electrical and Electronics Engineers Inc., 2019) Perez, E.; Zambelli, C.; Mahadevaiah, M.K.; Olivo, P.; Wenger, C.Achieving a reliable multi-level operation in resistive random access memory (RRAM) arrays is currently a challenging task due to several threats like the post-algorithm instability occurring after the levels placement, the limited endurance, and the poor data retention capabilities at high temperature. In this paper, we introduced a multi-level variation of the state-of-the-art incremental step pulse with verify algorithm (M-ISPVA) to improve the stability of the low resistive state levels. This algorithm introduces for the first time the proper combination of current compliance control and program/verify paradigms. The validation of the algorithm for forming and set operations has been performed on 4-kbit RRAM arrays. In addition, we assessed the endurance and the high temperature multi-level retention capabilities after the algorithm application proving a 1 k switching cycles stability and a ten years retention target with temperatures below 100 °C.
- ItemUltrafast vibrational control of organohalide perovskite optoelectronic devices using vibrationally promoted electronic resonance(Basingstoke : Nature Publishing Group, 2023) Gallop, Nathaniel. P.; Maslennikov, Dmitry R.; Mondal, Navendu; Goetz, Katelyn P.; Dai, Zhenbang; Schankler, Aaron M.; Sung, Woongmo; Nihonyanagi, Satoshi; Tahara, Tahei; Bodnarchuk, Maryna I.; Kovalenko, Maksym V.; Vaynzof, Yana; Rappe, Andrew M.; Bakulin, Artem A.Vibrational control (VC) of photochemistry through the optical stimulation of structural dynamics is a nascent concept only recently demonstrated for model molecules in solution. Extending VC to state-of-the-art materials may lead to new applications and improved performance for optoelectronic devices. Metal halide perovskites are promising targets for VC due to their mechanical softness and the rich array of vibrational motions of both their inorganic and organic sublattices. Here, we demonstrate the ultrafast VC of FAPbBr3 perovskite solar cells via intramolecular vibrations of the formamidinium cation using spectroscopic techniques based on vibrationally promoted electronic resonance. The observed short (~300 fs) time window of VC highlights the fast dynamics of coupling between the cation and inorganic sublattice. First-principles modelling reveals that this coupling is mediated by hydrogen bonds that modulate both lead halide lattice and electronic states. Cation dynamics modulating this coupling may suppress non-radiative recombination in perovskites, leading to photovoltaics with reduced voltage losses.
- ItemAdaptable security in wireless sensor networks by using reconfigurable ECC hardware coprocessors(London : Hindawi, 2010) Portilla, J.; Otero, A.; de la Torre, E.; Riesgo, T.; Stecklina, O.; Peter, S.; Langendörfer, P.Specific features of Wireless Sensor Networks (WSNs) like the open accessibility to nodes, or the easy observability of radio communications, lead to severe security challenges. The application of traditional security schemes on sensor nodes is limited due to the restricted computation capability, low-power availability, and the inherent low data rate. In order to avoid dependencies on a compromised level of security, a WSN node with a microcontroller and a Field Programmable Gate Array (FPGA) is used along this work to implement a state-of-the art solution based on ECC (Elliptic Curve Cryptography). In this paper it is described how the reconfiguration possibilities of the system can be used to adapt ECC parameters in order to increase or reduce the security level depending on the application scenario or the energy budget. Two setups have been created to compare the softwareand hardware-supported approaches. According to the results, the FPGA-based ECC implementation requires three orders of magnitude less energy, compared with a low power microcontroller implementation, even considering the power consumption overhead introduced by the hardware reconfiguration.
- ItemEvaluation of surface nuclear magnetic resonance-estimated subsurface water content([London] : IOP, 2011) Müller-Petke, M.; Dlugosch, R.; Yaramanci, U.The technique of nuclear magnetic resonance (NMR) has found widespread use in geophysical applications for determining rock properties (e.g. porosity and permeability) and state variables (e.g. water content) or to distinguish between oil and water. NMR measurements are most commonly made in the laboratory and in boreholes. The technique of surface NMR (or magnetic resonance sounding (MRS)) also takes advantage of the NMR phenomenon, but by measuring subsurface rock properties from the surface using large coils of some tens of meters and reaching depths as much as 150 m. We give here a brief review of the current state of the art of forward modeling and inversion techniques. In laboratory NMR a calibration is used to convert measured signal amplitudes into water content. Surface NMR-measured amplitudes cannot be converted by a simple calibration. The water content is derived by comparing a measured amplitude with an amplitude calculated for a given subsurface water content model as input for a forward modeling that must account for all relevant physics. A convenient option to check whether the measured signals are reliable or the forward modeling accounts for all effects is to make measurements in a well-defined environment. Therefore, measurements on top of a frozen lake were made with the latest-generation surface NMR instruments. We found the measured amplitudes to be in agreement with the calculated amplitudes for a model of 100 % water content. Assuming then both the forward modeling and the measurement to be correct, the uncertainty of the model is calculated with only a few per cent based on the measurement uncertainty.
- ItemData link layer considerations for future 100 Gbps terahertz band transceivers(London : Hindawi, 2017) Lopacinski, Lukasz; Brzozowski, Marcin; Kraemer, RolfThis paper presents a hardware processor for 100Gbps wireless data link layer. A serial Reed-Solomon decoder requires a clock of 12.5GHz to fulfill timings constraints of the transmission. Receiving a single Ethernet frame on a 100 Gbps physical layer may be faster than accessing DDR3 memory. Processing so fast streams on a state-of-the-art FPGA (field programmable gate arrays) requires a dedicated approach. Thus, the paper presents lightweight RS FEC engine, frames fragmentation, aggregation, and a protocol with selective fragment retransmission. The implemented FPGA demonstrator achieves nearly 120 Gbps and accepts bit error rate (BER) up to 2e - 3. Moreover, redundancy added to the frames is adopted according to the channel BER by a dedicated link adaptation algorithm. At the end, ASIC synthesis results are presented including detailed statistics of consumed energy per bit.