Search Results
Dust mass, cloud condensation nuclei, and ice-nucleating particle profiling with polarization lidar: Updated POLIPHON conversion factors from global AERONET analysis
2019, Ansmann, A., Mamouri, R.-E., Hofer, J., Baars, H., Althausen, D., Abdullaev, S.F.
The POLIPHON (Polarization Lidar Photometer Networking) method permits the retrieval of particle number, surface area, and volume concentration for dust and non-dust aerosol components. The obtained microphysical properties are used to estimate height profiles of particle mass, cloud condensation nucleus (CCN) and ice-nucleating particle (INP) concentrations. The conversion of aerosol-type-dependent particle extinction coefficients, derived from polarization lidar observations, into the aerosol microphysical properties (number, surface area, volume) forms the central part of the POLIPHON computations. The conversion parameters are determined from Aerosol Robotic Network (AERONET) aerosol climatologies of optical and microphysical properties. In this article, we focus on the dust-related POLIPHON retrieval products and present an extended set of dust conversion factors considering all relevant deserts around the globe. We apply the new conversion factor set to a dust measurement with polarization lidar in Dushanbe, Tajikistan, in central Asia. Strong aerosol layering was observed with mineral dust advected from Kazakhstan (0-2km height), Iran (2-5km), the Arabian peninsula (5-7km), and the Sahara (8-10km). POLIPHON results obtained with different sets of conversion parameters were contrasted in this central Asian case study and permitted an estimation of the conversion uncertainties.
Optical and geometrical aerosol particle properties over the United Arab Emirates
2020, Filioglou, Maria, Giannakaki, Elina, Backman, John, Kesti, Jutta, Hirsikko, Anne, Engelmann, Ronny, O’Connor, Ewan, Leskinen, Jari T.T., Shang, Xiaoxia, Korhonen, Hannele, Lihavainen, Heikki, Romakkaniemi, Sami, Komppula, Mika
One year of ground-based night-time Raman lidar observations has been analysed under the Optimization of Aerosol Seeding In rain enhancement Strategies (OASIS) project, in order to characterize the aerosol particle properties over a rural site in the United Arab Emirates. In total, 1130 aerosol particle layers were detected during the 1-year measurement campaign which took place between March 2018 and February 2019. Several subsequent aerosol layers could be observed simultaneously in the atmosphere up to 11 km. The observations indicate that the measurement site is a receptor of frequent dust events, but predominantly the dust is mixed with aerosols of anthropogenic and/or marine origin. The mean aerosol optical depth over the measurement site ranged at 0.37±0.12 and 0.21±0.11 for 355 and 532 nm, respectively. Moreover, mean lidar ratios of 43±11 sr at a wavelength of 355 nm and 39±10 sr at 532 nm were found. The average linear particle depolarization ratio measured over the course of the campaign was 15±6% and 19±7% at the 355 and 532 nm wavelengths, respectively. Since the region is both a source and a receptor of mineral dust, we have also explored the properties of Arabian mineral dust of the greater area of the United Arab of Emirates and the Arabian Peninsula. The observed Arabian dust particle properties were 45±5 (42±5) sr at 355 (532) nm for the lidar ratio, 25±2% (31±2 %) for the linear particle depolarization ratio at 355 (532) nm, and 0.3±0.2 (0.2±0.2) for the extinction-related Angstrom exponent (backscatterrelated Angstrom exponent) between 355 and 532 nm. This study is the first to report comprehensive optical properties of the Arabian dust particles based on 1-year long observations, using to their fullest the capabilities of a multi-wavelength Raman lidar instrument. The results suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of African mineral dust with regard to the particle depolarization ratios, but not for lidar ratios. The smaller lidar ratio values in this study compared to the reference studies are attributed to the difference in the geochemical characteristics of the soil originating in the study region compared to northern Africa. © 2020 Royal Society of Chemistry. All rights reserved.
The Dust Emission Potential of Agricultural‐Like Fires—Theoretical Estimates From Two Conceptually Different Dust Emission Parameterizations
2021, Wagner, R., Schepanski, K., Klose, M.
Agricultural fires affecting grass-, crop- and shrublands represent a major, mainly anthropogenically driven disturbance of many ecosystems. In addition to emissions of carbonaceous aerosol, they were found to inject also mineral dust particles into the atmosphere. The fires can significantly modulate the near-surface wind patterns so that conditions suitable for dust emission occur. However, the exact emission mechanism has not been investigated so far, but is inevitable for the understanding of its impacts on the Earth system. Here, we test two dust emission parameterizations representing saltation bombardment (SALT) and direct aerodynamic dust entrainment by (convective) turbulence (convective turbulent dust emission, CTDE) in the context of fire-modulated wind patterns using large-eddy simulation with an idealized setup to represent typical agricultural fire settings. Favorable aerodynamic preconditions for the initialization of both emission processes are found, however, with sometimes significant differences in dust emission flux depending on specific wind and fire properties. The strong fire-induced modulations of the instantaneous momentum flux suggest that CTDE can be a very potent emission process in the fire vicinity. Nevertheless, fire impacts on the friction velocity can be significant too, so that dust emission through SALT is facilitated as well. Ultimately, the specific aerodynamic conditions within pyro-convectively modulated wind patterns require the development of a parameterization that can describe these unique fire-related dust emissions and their influencing factors properly. This will finally allow for considering fire-induced dust emissions in aerosol-atmosphere models and an investigation of its atmospheric impacts such as on the radiation budget.
Composition of ice particle residuals in mixed-phase clouds at Jungfraujoch (Switzerland): Enrichment and depletion of particle groups relative to total aerosol
2018, Eriksen Hammer, Stine, Mertes, Stephan, Schneider, Johannes, Ebert, Martin, Kandler, Konrad, Weinbruch, Stephan
Ice particle residuals (IRs) and the total aerosol particle population were sampled in parallel during mixed-phase cloud events at the high-altitude research station Jungfraujoch in January-February 2017. Particles were sampled behind an ice-selective counterflow impactor (Ice-CVI) for IRs and a heated total inlet for the total aerosol particles. A dilution set-up was used to collect total particles with the same sampling duration as for IRs to prevent overloading of the substrates. About 4000 particles from 10 Ice-CVI samples (from 7 days of cloud events at temperatures at the site between g-10 and g-18°C) were analysed and classified with operator-controlled scanning electron microscopy. Contamination particles (identified by their chemical composition), most likely originating from abrasion in the Ice-CVI and collection of secondary ice, were excluded from further analysis. Approximately 3000 total aerosol particles (IRs and interstitial particles) from 5 days in clouds were also analysed. Enrichment and depletion of the different particle groups (within the IR fraction relative to the total aerosol reservoir) are presented as an odds ratio relative to alumosilicate (particles only consisting of Al, Si, and O), which was chosen as reference due to the large enrichment of this group relative to total aerosol and the relatively high number concentration of this group in both total aerosol and the IR samples. Complex secondary particles and soot are the major particle groups in the total aerosol samples but are not found in the IR fraction and are hence strongly depleted. C-rich particles (most likely organic particles) showed a smaller enrichment compared to aluminosilicates by a factor of ∼ 20. The particle groups with enrichment similar to aluminosilicate are silica, Fe aluminosilicates, Ca-rich particles, Ca sulfates, sea-salt-containing particles, and metal/metal oxide. Other aluminosilicates-consisting of variable amounts of Na, K, Ca, Si, Al, O, Ti, and Fe-are somewhat more enriched (factor ∼ 2) and Pb-rich particles are more (factor ∼ 8) enriched than aluminosilicates. None of the sampled IR groups showed a temperature or size dependence in respect to ice activity, which might be due to the limited sampling temperature interval and the similar size of the particles. Footprint plots and wind roses could explain the different total aerosol composition in one sample (carbonaceous particle emission from the urban/industrial area of Po Valley), but this did not affect the IR composition. Taking into account the relative abundance of the particle groups in total aerosol and the ice nucleation ability, we found that silica, aluminosilicates, and other aluminosilicates were the most important ice particle residuals at Jungfraujoch during the mixed-phase cloud events in winter 2017.
The immersion mode ice nucleation behavior of mineral dusts: A comparison of different pure and surface modified dusts
2014, Augustin-Bauditz, S., Wex, H., Kanter, S., Ebert, M., Niedermeier, D., Stolz, F., Prager, A., Stratmann, F.
In this study we present results from immersion freezing experiments with size-segregated mineral dust particles. Besides two already existing data sets for Arizona Test Dust (ATD), and Fluka kaolinite, we show two new data sets for illite-NX, which consists mainly of illite, a clay mineral, and feldspar, a common crustal material. The experiments were carried out with the Leipzig Aerosol Cloud Interaction Simulator. After comparing the different dust samples, it became obvious that the freezing ability was positively correlated with the K-feldspar content. Furthermore, a comparison of the composition of the ATD, illite-NX, and feldspar samples suggests that within the K-feldspars, microcline is more ice nucleation active than orthoclase. A coating with sulfuric acid leads to a decrease in the ice nucleation ability of all mineral dusts, with the effect being more pronounced for the feldspar sample. Key Points The freezing ability of mineral dusts correlated with the K-feldspar contentAmong feldspars, microcline shows a better ice nucleation ability than orthoclaseAfter coating, all investigated dusts feature a similar ice nucleation ability.
North African mineral dust sources: New insights from a combined analysis based on 3D dust aerosol distributions, surface winds and ancillary soil parameters
2020, Vandenbussche, Sophie, Callewaert, Sieglinde, Schepanski, Kerstin, De Mazière, Martine
Mineral dust aerosol is a key player in the climate system. Determining dust sources and the spatio-temporal variability of dust emission fluxes is essential for estimating the impact of dust on the atmospheric radiation budget, cloud and precipitation formation processes, the bio-productivity and, ultimately, the carbon cycle. Although much effort has been put into determining dust sources from satellite observations, geo-locating active dust sources is still challenging and uncertainties in space and time are evident. One major source of uncertainty is the lack of clear differentiation between near-source dust aerosol and transported dust aerosol. In order to reduce this uncertainty, we use 3D information on the distribution of dust aerosol suspended in the atmosphere calculated from spectral measurements obtained by the Infrared Atmospheric Sounding Interferometer (IASI) by using the Mineral Aerosols Profiling from Infrared Radiance (MAPIR) algorithm. In addition to standard dust products from satellite observations, which provide 2D information on the horizontal distribution of dust, MAPIR allows for the retrieval of additional information on the vertical distribution of dust plumes. This ultimately enables us to separate between near-source and transported dust plumes. Combined with information on near-surface wind speed and surface properties, low-altitude dust plumes can be assigned to dust emission events and low-altitude transport regimes can be excluded. Consequently, this technique will reduce the uncertainty in automatically geo-locating active dust sources. The findings of our study illustrate the spatio-temporal distribution of North African dust sources based on 9 years of data, allowing for the observation of a full seasonal cycle of dust emissions, differentiating morning and afternoon/evening emissions and providing a first glance at long-term changes. In addition, we compare the results of this new method to the results from Schepanski et al. (2012), who manually identified dust sources from Spinning Enhanced Visible and InfraRed Imager (SEVIRI) red-green-blue (RGB) images. The comparison illustrates that each method has its strengths and weaknesses that must be taken into account when using the results. This study is of particular importance for understanding future environmental changes due to a changing climate. © Author(s) 2020