Effects of post metallization annealing on Al2O3 atomic layer deposition on n-GaN

dc.bibliographicCitation.date2023
dc.bibliographicCitation.firstPage015006
dc.bibliographicCitation.issue1
dc.bibliographicCitation.journalTitleSemiconductor science and technology : devoted exclusively to semiconductor research and applications …eng
dc.bibliographicCitation.volume38
dc.contributor.authorTadmor, Liad
dc.contributor.authorBrusaterra, Enrico
dc.contributor.authorTreidel, Eldad Bahat
dc.contributor.authorBrunner, Frank
dc.contributor.authorBickel, Nicole
dc.contributor.authorVandenbroucke, Sofie S. T.
dc.contributor.authorDetavernier, Christophe
dc.contributor.authorWürfl, Joachim
dc.contributor.authorHilt, Oliver
dc.date.accessioned2023-01-27T08:11:03Z
dc.date.available2023-01-27T08:11:03Z
dc.date.issued2022
dc.description.abstractThe chemical, physical and electrical properties and the robustness of post metallization annealed Al2O3 atomic layers deposited on n-type GaN are investigated in this work. Planar metal insulator capacitors are used to demonstrate a gate-first with following ohmic contacts formation at elevated temperature up to 600 °C process flow. X-ray photoelectron spectroscopy indicates that no new bonds in the Al2O3 layer are formed due to exposure to the elevated annealing temperature. X-ray diffraction measurements show no crystallization of the oxide layer. Atomic force microscopy shows signs of degradation of the sample annealed at 600 °C. Electrical measurements indicate that the elevated annealing temperature results in an increase of the oxide depletion and the deep depletion capacitances simultaneously, that results in a reduction of the flat band voltage to zero, which is explained by fixed oxide charges curing. A forward bias step stress capacitance measurement shows that the total number of induced trapped charges are not strongly affected by the elevated annealing temperatures. Interface trap density of states analysis shows the lowest trapping concentration for the capacitor annealed at 500 °C. Above this temperature, the interface trap density of states increases. When all results are taken into consideration, we have found that the process thermal budget allows for an overlap between the gate oxide post metallization annealing and the ohmic contact formation at 500 °C.eng
dc.description.versionpublishedVersioneng
dc.identifier.urihttps://oa.tib.eu/renate/handle/123456789/11103
dc.identifier.urihttp://dx.doi.org/10.34657/10129
dc.language.isoeng
dc.publisherBristol : IOP Publ.
dc.relation.doihttps://doi.org/10.1088/1361-6641/aca42a
dc.relation.essn1361-6641
dc.relation.issn0268-1242
dc.rights.licenseCC BY 4.0 Unported
dc.rights.urihttps://creativecommons.org/licenses/by/4.0
dc.subject.ddc530
dc.subject.ddc620
dc.subject.otherAl O 2 3eng
dc.subject.otheratomic layer depositioneng
dc.subject.othergallium nitrideeng
dc.subject.otherpost metallization annealingeng
dc.titleEffects of post metallization annealing on Al2O3 atomic layer deposition on n-GaNeng
dc.typeArticleeng
dc.typeTexteng
tib.accessRightsopenAccess
wgl.contributorFBH
wgl.subjectIngenieurwissenschaftenger
wgl.subjectPhysikger
wgl.typeZeitschriftenartikelger
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Effects_of_post_metallization_annealing.pdf
Size:
2.05 MB
Format:
Adobe Portable Document Format
Description: