384 results
Search Results
Now showing 1 - 10 of 384
- ItemProdukthaftung in der Apotheke(Stuttgart : Deutscher Apotheker Verlag, 2005) Diebold, Steffen M.Stellt ein Apotheker Arzneimittel, Medizinprodukte oder andere apothekenübliche Waren (z.B. Kosmetika oder Mixturen nach Angaben von Heilpraktikern, Homöopathen oder Anthroposophen) in seiner Offizin selbst her, so haftet er (grundsätzlich) einem dadurch ggf. geschädigten Kunden (auch) nach den Vorschriften des Produkthaftungsgesetzes. Diese Haftung besteht unabhängig vom eigenen Verschulden. Sie greift auch bei der Einfuhr von Arzneimitteln aus Staaten, die nicht zum Europäischen Wirtschaftsraum gehören, sowie bei Import und Abgabe von aus Drittländern eingeführten und im Geltungsbereich des Arzneimittelgesetzes (AMG) nicht zugelassenen Fertigarzneimitteln nach § 73 (3) AMG.
- ItemCorrelation of carbon nanotube dispersability in aqueous surfactant solutions and polymers(New York, NY [u.a.] : Pergamon Press, 2009) Krause, Beate; Petzold, Gudrun; Pegel, Sven; Pötschke, PetraIn order to assess the dispersability of carbon nanotube materials, tubes produced under different synthesis conditions were dispersed in aqueous surfactant solutions and the sedimentation behaviour under centrifugation forces was investigated using a LUMiFuge stability analyzer. The electrical percolation threshold of the nanotubes after melt mixing in polyamide 6.6 was determined and the state of dispersion was studied. As a general tendency, the nanotubes having better aqueous dispersion stability showed lower electrical percolation threshold and better nanotube dispersion in the composites. This indicates that the investigation of the stability of aqueous dispersions is also able to give information about the nanotubes inherent dispersability in polymer melts, both strongly influenced by the entanglement and agglomerate structure of the tubes within the as-produced nanotube materials. The shape of the nanotubes in the aqueous dispersions was assessed using a SYSMEX flow particle image analyzer and found to correspond to the shape observed from cryofractured surfaces of the polymer composites. © 2008 Elsevier Ltd. All rights reserved.
- ItemCalculations on the dimensioning of plunger cell and feeder head(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Reeßing, Friedrich; Schötz, Eberhard[no abstract available]
- ItemTime resolved fluorescence measurements on Tb3+ and Mn2+ doped glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Herrmann, Andreas; Ehrt, DorisTb3+ (4f8) and Mn2+ (3d5) ions, known as active luminescent centres for blue, green and red fluorescence, were doped in various fluoride, phosphate and Silicate glasses with well known structure. Narrow bands of f-f transitions with strong emission of Tb3+ in the blue, green and red and broad bands of d-d transitions of Mn2+ were measured with green emission in high optical basicity glasses with tetrahedrally coordinated Mn2+. Orange to red Mn2+ emission was found in glasses with low optical basicity where Mn2+ is octahedrally coordinated. Lifetimes, τe, in the range of milliseconds were recorded in dependence of glass composition and dopant concentration for both Tb3+ and Mn2+ doped glasses. Fluorescence lifetimes are as well shortened by higher basicity of the glasses as by increasing dopant concentration.
- ItemPreparation and properties of model glasses of historic enamels of the Green Vault Museum, Dresden(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Wagner, Marcel; Frischat, Günther Heinz; Hellmold, PeterMany enamelled art objects of the Green Vauk Museum, Dresden, have been suffering a severe deterioration of the enamel layers during the last 20 to 30 years. The authors obtained three splinters of about 200 mg weight each of green, blue, and opaque turquoise enamel of the Aurangzeb ensemble. Model glasses of these originals were prepared which should match them as closely as possible. The investigations showed that the simple degree of network polymerization related to the SiO2/Na2O ratio is insufficient to understand their chemical properties even if one takes components such as MgO, CaO or AI2O3 also into consideration. To understand further structural influences IR, UV/VIS, and EPR spectroscopy studies were performed on the enamels, and it could be evidenced that components such as MnO, Fe2O3, CuO, CoO, PbO and SnO2 not only act as colorants or opacifiers but also as stabilizers of these materials. Taking this into account the chemical and physical behavior of the respective enamels in the museum can be elucidated.
- ItemSilicon in container glasses, its solution kinetics and dissolving potential in container glass furnaces(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Pitzel, Christian; Stachel, Dörte; Ehrig, ReinerThe forming proeess of sihcon stones in differently colored container glasses under the action of different aluminum pieces will be discussed and some special features during the generation reported. The dissolution of formed silicon stones was analyzed in dependence on melting time, temperature and color of the glass. With the knowledge of these parameters the rate constant and the diffusion coefficient of the dissoludon were calculated. The main results are: first, it is not possible to generate large silicon stones anyway, indicated by big aluminum pieces which will be divided when they become liquid. Second, the dissolving of the silicon stones does not go on homogenously about the whole temperature range analyzed. But it can be divided into three fields: an area below, an area around and an area above the melting point of the silicon. The reason for these differences is found in the SiO2-rich layer around the stones which will be formed and dissolved by different rates in colored container glasses. On the basis of these dissolving rates and of the temperature profiles in glass meldng furnaces the dissolving potential in furnaces could be calculated. Three possible routes of silicon stones through special types of furnaces show the respective dissolving potential for silicon. The potential for dissolution of elementary Silicon for the calculated types of Container glass furnaces is nearly the same. The dissolution rates could be improved by raising the temperature of the glass bath in the furnace and by raising the dwell time of the silicon stones in the furnace.
- ItemInfluence of glass/mould interfaces on sticking(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Pech, Jérôme; Berthomé, Gregory; Jeymond, Michel; Eustathopoulos, NicolasThe sticking of glass on mould materials is a critical problem since it can lead to the Interruption of glass Container production. This study is a contribution to understanding the phenomena at the origin of sticking. The experiments involve loading and spreading glass gobs on flat metallic Substrates. They are performed directly on a glassmaking machine, thus the thermal conditions of the processes are simulated as closely as possible. Special attention is paid to characterizing the metal and glass surfaces before and after contact using a surface profilometer, AFM, and SEM with an EDX spectrometer. The influence on sticking of mould temperature, surface roughness and surface chemistry (nonoxidized, pre-oxidized and lubricated) is investigated.
- ItemEvolution of the compositions of commercial glasses 1830 to 1990. Part II. Container glass(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Smrček, AntonínThis paper treats container glasses in the same way as an earlier paper reviewed flat glass compositions. Data for more than 970 analyses of container glasses manufactured during 150 years in 37 countries have been collected and analysed. The data obviously include containers made by hand as well as by machine from green, white and amber glasses. Compositions developed along two lines, one being green and brown glasses coloured by manganese; such glasses were characterized by low alkali content compensated by increased RO and higher AI2O3 contents. The other, younger, line includes white glasses historically descended from old "forest glasses" and closely related amber glasses. The compositions of both lines converged gradually, so that from about 1970 all container glasses have fallen within a narrow range of compositions, differing in little but their colouring oxides. Differences between particular producers and countries have decreased a great deal.
- ItemEffect of some nucleating agents on thermal expansion behaviour of Li2O-BaO-Al2O3-SiO2 glasses and glass-ceramics(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Khater, Gamal A.; Idris, Maher H.The thermal expansion behaviour of some glasses and glass-ceramics within the system spodumence (LiAlSi2O6)-celsian (BaAl2Si2O8) containing LiF, TiO2 and Cr2O3 as nucleation catalysts was described. LiF and TiO2 were found to increase the thermal expansion of the glasses investigated, whereas Cr2O3 slightly lowered the expansion coefficient. The dilatometric transition and softening points of the glasses showed the reverse behaviour. The thermal expansion of the glass-ceramics was a function of type and amount of nucleating agent and heat treatment which greatly affected the mineralogical constitution of the materials.
- ItemLong-range granular feature of silicate glasses and its relation to glass properties(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Wang, ChunNumerous experimental results show that silica and silicate glasses consist of higher density granules about 20 to 50 nm sized and lower density linkages. Such long-range feature should originate from the long-range density fluctuation of the glass-forming liquid. Due to the highly coordinated network structure of glass the lower density regions may be under strain. Following this assumption many phenomena of glass observed here and reported in the literature can be explained well, e.g. anomalous conductivity, brittleness, granular boundary contour of crack, high conductivity on the fracture surface, cloudy damage after dishwashing, corrosion products on glass surface, distribution pattern of Ag colloidal particles in float glass bath side, disproportional large influence of water on glass properties, the unusual increase in expansion coefficient with increasing modifier content, etc.