14 results
Search Results
Now showing 1 - 10 of 14
- ItemModulation Linearity Characterization of Si Ring Modulators(Washington, DC : OSA, 2021) Jo, Youngkwan; Mai, Christian; Lischke, Stefan; Zimmermann, Lars; Choi, Woo-YoungModulation linearity of Si ring modulators (RMs) is investigated through the numerical simulation based on the coupled-mode theory and experimental verification. Numerical values of the key parameters needed for the simulation are experimentally extracted. Simulation and measurement results agree well. With these, the influence of input optical wavelength and power on the Si RM linearity are characterized.
- ItemValley control by linearly polarized laser pulses: example of WSe2(Washington, DC : OSA, 2022) Sharma, S.; Elliott, P.; Shallcross, S.Electrons at the band edges of materials are endowed with a valley index, a quantum number locating the band edge within the Brillouin zone. An important question is then how this index may be controlled by laser pulses, with current understanding that it couples exclusively via circularly polarized light. Employing both tight-binding and state-of-the-art time dependent density function theory, we show that on femtosecond time scales valley coupling is a much more general effect. We find that two time separated linearly polarized pulses allow almost complete control over valley excitation, with the pulse time difference and polarization vectors emerging as key parameters for valley control. Our findings highlight the possibility of controlling coherent electronic excitation by successive femtosecond laser pulses, and offer a route towards valleytronics in two-dimensional materials.
- ItemSub-cycle valleytronics: control of valley polarization using few-cycle linearly polarized pulses(Washington, DC : OSA, 2021) Jiménez-Galán, Álvaro; Silva, Rui E. F.; Smirnova, Olga; Ivanov, MishaSo far, it has been assumed that selective excitation of a desired valley in the Brillouin zone of a hexagonal two-dimensional material has to rely on using circularly polarized fields. We theoretically demonstrate a way to control the valley excitation in hexagonal 2D materials on a few-femtosecond timescale using a few-cycle, linearly polarized pulse with controlled carrier–envelope phase. The valley polarization is mapped onto the strength of the perpendicular harmonic signal of a weak, linearly polarized pulse, which allows to read this information all-optically without destroying the valley state and without relying on the Berry curvature, making our approach potentially applicable to inversion-symmetric materials. We show applicability of this method to hexagonal boron nitride and MoS2.
- ItemAttosecond investigation of extreme-ultraviolet multi-photon multi-electron ionization(Washington, DC : OSA, 2022) Kretschmar, M.; Hadjipittas, A.; Major, B.; Tümmler, J.; Will, I.; Nagy, T.; Vrakking, M. J. J.; Emmanouilidou, A.; Schütte, B.Multi-electron dynamics in atoms and molecules very often occur on sub- to few-femtosecond time scales. The available intensities of extreme-ultraviolet (XUV) attosecond pulses have previously allowed the time-resolved investigation of two-photon, two-electron interactions. Here we study double and triple ionization of argon atoms involving the absorption of up to five XUV photons using a pair of intense attosecond pulse trains (APTs). By varying the time delay between the two APTs with attosecond precision and the spatial overlap with nanometer precision, we obtain information on complex nonlinear multi-photon ionization pathways. Our experimental and numerical results show that Ar2+ is predominantly formed by a sequential two-photon process, whereas the delay dependence of the Ar3+ ion yield exhibits clear signatures of the involvement of a simultaneous two-photon absorption process. Our experiment suggests that it is possible to investigate multi-electron dynamics using attosecond pulses for both pumping and probing the dynamics.
- ItemElectron dynamics in laser-driven atoms near the continuum threshold(Washington, DC : OSA, 2021) Liu, Mingqing; Xu, Songpo; Hu, Shilin; Becker, Wilhelm; Quan, Wei; Liu, Xiaojun; Chen, JingStrong-field ionization and Rydberg-state excitation (RSE) near the continuum threshold exhibit two phenomena that have attracted a lot of recent attention: the low-energy structure (LES) just above and frustrated tunneling ionization just below the threshold. The former becomes apparent for longer laser wavelengths, while the latter has been especially investigated in the near infrared; both have been treated as separate phenomena so far. Here we present a unified perspective based on electron trajectories, which emphasizes the very important role of the electron-ion Coulomb interaction as expected in this energy region. Namely, those trajectories that generate the LES can also be recaptured into a Rydberg state. The coherent superposition of the contributions of such trajectories with different travel times (each generating one of the various LES peaks) causes an oscillation in the intensity dependence of the RSE yield, which is especially noticeable for longer wavelengths. The theory is illustrated by RSE experiments at 1800 nm, which agree very well with the theory with respect to position and period of the oscillation. The wavelength scaling of the RSE oscillation is also discussed. Our work establishes a solid relationship between processes below and above the threshold and sheds new light on atomic dynamics driven by intense laser fields in this critical energy region.
- ItemPhotonic lanterns: a practical guide to filament tapering(Washington, DC : OSA, 2021) Davenport, John J.; Diab, Momen; Deka, Pranab J.; Tripathi, Aashana; Madhav, Kalaga; Roth, Martin M.We present a detailed method of tapering and drawing photonic lanterns using a filament glass processing system. Single-mode fibers (SMFs) were stacked inside a low refractive index, fluorine-doped capillary, which was then heated and tapered to produce a transition from single-mode to multi-mode. Fabrication parameters were considered in four categories: method of preparation and stacking of SMFs into a capillary, heat and filament dimensions of the glass processor, capillary ID, and the use of vacuum during tapering. 19- and 37- fiber lanterns were drawn, demonstrating good fusion between SMF claddings, a clear differentiation between core and cladding in the multimode (MM) section, and well-ordered arrangements between SMFs, which is controlled during the tapering process. The transmission efficiency of a 19-fiber photonic lantern, compared to an MMF with the same core diameter and NA, has a relative transmission efficiency of 1.19 dB or 67.1%. The steps and parameters provided in this paper form a framework for fabricating quality photonic lanterns.
- ItemPolarization-resolved second-harmonic generation imaging through a multimode fiber(Washington, DC : OSA, 2021) Cifuentes, Angel; Pikálek, Tomáš; Ondráčková, Petra; Amezcua-Correa, Rodrigo; Antonio-Lopez, José Enrique; Čižmár, Tomáš; Trägårdh, JohannaMultimode fiber-based endoscopes have recently emerged as a tool for minimally invasive endoscopy in tissue, at depths well beyond the reach of multiphoton imaging. Here, we demonstrate label-free second-harmonic generation (SHG) microscopy through such a fiber endoscope. We simultaneously fully control the excitation polarization state and the spatial distribution of the light at the fiber tip, and we use this to implement polarization-resolved SHG imaging, which allows imaging and identification of structural proteins such as collagen and myosin. We image mouse tail tendon and heart tissue, employing the endoscope at depths up to 1 mm, demonstrating that we can differentiate these structural proteins. This method has the potential for enabling instant and in situ diagnosis of tumors and fibrotic conditions in sensitive tissue with minimal damage.
- ItemCompact intense extreme-ultraviolet source(Washington, DC : OSA, 2021) Major, Balázs; Ghafur, Omair; Kovács, Katalin; Varjú, Katalin; Tosa, Valer; Vrakking, Marc J. J.; Schütte, B.High-intensity laser pulses covering the ultraviolet to terahertz spectral regions are nowadays routinely generated in a large number of laboratories. In contrast, intense extreme-ultraviolet (XUV) pulses have only been demonstrated using a small number of sources including free-electron laser facilities [1-3] and long high-harmonic generation (HHG) beamlines [4-9]. Here we demonstrate a concept for a compact intense XUV source based on HHG that is focused to an intensity of $2 \times 10^{14}$ W/cm$^2$, with a potential increase up to $10^{17}$ W/cm$^2$ in the future. Our approach uses tight focusing of the near-infrared (NIR) driving laser and minimizes the XUV virtual source size by generating harmonics several Rayleigh lengths away from the NIR focus. Accordingly, the XUV pulses can be refocused to a small beam waist radius of 600 nm, enabling the absorption of up to four XUV photons by a single Ar atom in a setup that fits on a modest (2 m) laser table. Our concept represents a straightforward approach for the generation of intense XUV pulses in many laboratories, providing novel opportunities for XUV strong-field and nonlinear optics experiments, for XUV-pump XUV-probe spectroscopy and for the coherent diffractive imaging of nanoscale structures.
- ItemRecent progress in the development of β-Ga2O3 scintillator crystals grown by the Czochralski method(Washington, DC : OSA, 2021) Drozdowski, Winicjusz; Makowski, Michał; Witkowski, Marcin E.; Wojtowicz, Andrzej J.; Irmscher, Klaus; Schewski, Robert; Galazka, ZbigniewA high-quality bulk single crystal of β-Ga2O3 has been grown by the Czochralski method and its basic scintillation characteristics (light yield, energy resolution, proportionality, and scintillation decay times) have been investigated. All the samples cut from the crystal show promising scintillation yields between 8400 and 8920 ph/MeV, which is a noticeable step forward compared to previous studies. The remaining parameters, i.e. the energy resolution slightly above 10% (at 662 keV) and the scintillation mean decay time just under 1 μs, are at the same level as we have formerly recognized for β-Ga2O3. The proportionality of yield seems not to deviate from standards determined by other commercial scintillators.
- ItemInfluence of diluted acid mixtures on selective etching of MHz- and kHz-fs-laser inscribed structures in YAG(Washington, DC : OSA, 2021) Hasse, Kore; Kip, Detlef; Kränkel, ChristianWe show that the inscription velocity of fs-laser written structures in YAG crystals can be significantly improved by the use of MHz repetition rates for the writing process. Using a 10 MHz inscription laser, record high writing velocities up to 100 mm/s are achieved. Also, the selective etching process is accelerated using a diluted mixture of 22% H3PO4 and 24% H2SO4. The diluted mixture enables selective etching of up to 9.6 mm long, 1 µm wide and 18 µm high microchannels in 23 days. The etching parameter D of 11.2 µm2/s is a factor of 3 higher than previously reported and the selectivity is even increased by an order of magnitude.